
Genuine AirTAC fixed mounting height stopper cylinder, order code TTQ32X20C from the TTQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TTQ32X20C is a fixed mounting height stopper cylinder built on the TTQ series Dia 32 mm bore with a 20 mm stroke (tolerance +1.0/0 mm) and the C round rod head. It is single acting pull-in: air through the PT1/8 port retracts the rod to lower the stopper, and when the supply is cut the spring extends the rod, so the stopper rises and blocks pallets, boxes or workpieces on the conveyor even during an air failure.
The body mounts through holes or the tapped holes at both ends, runs on 0.2-1.0 MPa (proof pressure 1.5 MPa / 215 psi) with a bumper cushion, needs no lubrication, and works from -20 to +70 C. This code carries no magnet (the S option is not selected), so position switches that rely on a magnet will not trigger on it; the sensor grooves on the two body sides remain available for external bracketing.
| Order code | TTQ32X20C |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Round rod |
| Magnet | No magnet |
| Action | Single acting, spring extend |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.25-1.0 MPa on Ø20, 0.2-1.0 MPa on other bores |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TTQ series specifications and ordering code.
Pick TTQ32X20C when you want the simplest head: the round rod gives a narrow, direct contact point backed by the bumper. Choose TTQ32X20B if the pallet edge needs a flat contact face, TTQ32X20R for a roller that rolls under chain-carried loads, or TTQ32X20K when the impact chart calls for the lever roller with adjustable oil cushion. Add the S option (magnet) if your station needs magnetic position sensing; TTQ32X20C omits it.
AirtacDistr lists every TTQ32 order code with its price on one page at https://airtacdistr.com/products/airtac-ttq32-stopper-cylinder
Spring-extend action lifts the round rod into the pallet path the moment air is lost, holding flow on a powered conveyor.
Dia 32 bore with 20 mm stroke queues boxes one at a time ahead of a sorter, released on a single PT1/8 air signal.
The round rod head registers the leading workpiece edge at a fixed mounting height before it enters the loading nest.
Dia 32 mm bore, 20 mm stroke (+1.0/0), round rod (C) stopper, no magnet, PT1/8 port, operating pressure 0.2-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, single acting spring extend, no lubrication required.
The TTQ32X20C is single acting pull-in: air retracts the rod, and with no supply the built-in spring pushes the rod out, so the round rod rises and keeps stopping the load. Note this code has no magnet, so confirm sensing from the datasheet if position feedback is needed.