
Genuine AirTAC fixed mounting height stopper cylinder, order code TTQ32X20KF from the TTQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TTQ32X20KF combines the Dia 32 mm TTQ stopper cylinder's 20 mm stroke (+1.0/0) with the K lever roller head and adjustable oil shock absorber, and adds the F self-lock option. The self-lock stops the lever from springing back after the load passes, which would otherwise push the stopped load backwards - so a pallet held at the stop stays put instead of being kicked rearwards.
The cylinder stays single acting pull-in: air at the PT1/8 port retracts the stopper, and on supply loss the spring extends the rod to raise it. It runs on 0.2-1.0 MPa (proof 1.5 MPa / 215 psi) between -20 and +70 C with a bumper cushion, mounts through holes or the tapped holes at both ends, follows JIS standards and needs no lubrication. No magnet is fitted in this code, so magnetic switches will not detect it.
| Order code | TTQ32X20KF |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | No magnet |
| Action | Single acting, spring extend |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.25-1.0 MPa on Ø20, 0.2-1.0 MPa on other bores |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TTQ series specifications and ordering code.
TTQ32X20KF exists because the F self-lock is offered only with the lever roller: rod versions TTQ32X20C, TTQ32X20B and TTQ32X20R, and roller TTQ32X20R, cannot take it. Choose TTQ32X20KF over plain TTQ32X20K whenever a reversed push on the stopped load is a risk - for example gravity feed or inclined sections. If your line is level and loads arrive gently, the plain K without self-lock is the simpler choice.
AirtacDistr lists every TTQ32 order code with its price on one page at https://airtacdistr.com/products/airtac-ttq32-stopper-cylinder
Self-lock keeps the lever from springing back, so pallets coasting down a gravity section remain held at the stop.
The oil-cushioned lever roller stops the lead pallet gently while self-lock prevents rearward push from queued carriers.
Holds the workpiece at a fixed height for a sensor check or transfer arm; the body sensor grooves support external bracketing.
Dia 32 mm bore, 20 mm stroke (+1.0/0), lever roller (K) stopper with adjustable oil cushion and F self-lock, no magnet, PT1/8 port, operating pressure 0.2-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, single acting spring extend.
After the stopped load passes or is released, an unsecured lever roller can spring back and push the load backwards. The F option locks the lever against that motion. It is only available on the lever roller head, so it appears on TTQ32X20KF but not on the C, B or R stopper versions.