
Genuine AirTAC fixed mounting height stopper cylinder, order code TTQ32X20SC from the TTQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The TTQ32X20SC is the round rod version of the Dia 32 mm TTQ stopper cylinder with a 20 mm stroke. The C head presents a narrow round stopping edge, useful where loads arrive along a defined lane and you want minimal contact area, for example against the edge of a pallet board or a fixture nest. It is single acting pull-in: compressed air retracts the rod, and with the air cut the spring extends it, so the stopper rises to hold the load whenever pressure is absent.
The S option puts a magnet on the piston, so switches placed in the sensor grooves on the two sides of the body can report the stopper state to your controller. Supply air filtered to 40 um at 0.2 to 1.0 MPa through the PT1/8 port; the cylinder withstands 1.5 MPa (215 psi) proof pressure across -20 to +70 C and needs no lubrication. Mount through holes or the tapped holes at both ends.
| Order code | TTQ32X20SC |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Round rod |
| Magnet | Magnet |
| Action | Single acting, spring extend |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.25-1.0 MPa on Ø20, 0.2-1.0 MPa on other bores |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TTQ series specifications and ordering code.
The TTQ32 ordering table offers four heads: C round rod, B flat rod, R roller, K lever roller with adjustable oil cushion. Pick this SC code when you want the simple round rod plus position feedback via the S magnet; the TTQ32X20SB flat rod spreads the contact over a wider face, the TTQ32X20R roller lets loads ride onto the head, and the TTQ32X20K lever roller with adjustable oil cushion absorbs the hardest entries. Without the S the same cylinder is the unmarked TTQ32X20C, which leaves the body sensor grooves unusable for magnetic switching. The F self-lock letter exists only on the K lever roller version.
AirtacDistr lists every TTQ32 order code with its price on one page at https://airtacdistr.com/products/airtac-ttq32-stopper-cylinder
The round rod edge catches pallet stringers on chain lines, and the piston magnet signals hold or release through the body sensor grooves.
Stops fixtures at a defined point where only a narrow contact edge is wanted, with the S magnet giving the PLC a position signal.
Dropping air pressure extends the rod automatically, so the round rod blocks product flow during supply faults without extra valves.
Dia 32 mm bore, 20 mm stroke (+1.0/0 mm tolerance), C round rod stopper with S magnet, single acting spring extend (pull-in), PT1/8 port, operating pressure 0.2 to 1.0 MPa on this bore, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, air filtered by a 40 um element.
It combines the round rod head with the S magnet, so magnetic switches in the two side sensor grooves report stopper position, which the unmarked C version cannot do. Compared with the SB flat rod and R roller siblings, the round rod gives the smallest contact edge; the K lever roller with F self-lock and adjustable oil cushion remains the softest-stopping option.