verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TTQ32 · Fixed mounting height Stopper Cylinder

Airtac TTQ Stopper Cylinder TTQ32X20SR

Genuine AirTAC fixed mounting height stopper cylinder, order code TTQ32X20SR from the TTQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke20 mm
  • StopperRoller
  • MagnetMagnet
  • ActionSingle acting, spring extend
  • MountingThrough holes, tapped both ends
  • BoreØ32 mm
$69.08 $76.58Save 9%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every TTQ32 stroke, stopper and magnet on one page All TTQ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac TTQ Stopper Cylinder TTQ32X20SR

The AirTAC TTQ32X20SR uses the R roller stopper head on the fixed mounting height TTQ32 platform: a Dia 32 mm bore with a 20 mm stroke (+1.0/0 mm tolerance). It is single acting pull-in type, so air retracts the rod and the spring extends it the moment air is cut, keeping the stopper up and the line safe during a pressure loss. The roller presents a rolling contact face to passing product, letting items ride over the head smoothly as they are stopped and released.

The S magnet is fitted on this code, so a position sensor can track the piston through the sensor grooves on both sides of the body. Mounting is by through holes or the tapped holes at both ends, the port is PT1/8, and the bumper cushion and thicker piston rod help the cylinder take the impact of stopping pallets, boxes and workpieces.

Airtac TTQ Stopper Cylinder TTQ32X20SR Technical Specifications

Order codeTTQ32X20SR
ProductFixed mounting height Stopper Cylinder
Stroke20 mm
StopperRoller
MagnetMagnet
ActionSingle acting, spring extend
MountingThrough holes, tapped both ends
BoreØ32 mm
Strokes10, 15, 20 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.25-1.0 MPa on Ø20, 0.2-1.0 MPa on other bores
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TTQ series specifications and ordering code.

How to choose

TTQ32X20SR is the roller-head choice in the TTQ32 range with magnet and 20 mm stroke. Choose it over the lever roller TTQ32X20SK when you want simple rolling contact without the adjustable oil cushion, and over TTQ32X20SKF when self-lock is not needed. If your fixture prefers a fixed contact face rather than a rolling one, the flat rod TTQ32X20SB and round rod TTQ32X20SC are the remaining stopper options.

AirtacDistr lists every TTQ32 order code with its price on one page at https://airtacdistr.com/products/airtac-ttq32-stopper-cylinder

Applications

conveyor_belt

Roller conveyor stops

On roller or belt conveyors the R roller head rolls under passing cartons and pallets, letting the 20 mm stroke raise and lower the stopper between product pitches.

factory

Fail-safe line stopping

Because the spring extends the rod whenever air is cut, products are held stopped during a supply failure, and the magnet confirms rod position through the body sensor grooves.

settings

Fixture clamping and locating

Use the 20 mm pull-in stroke to lift workpieces off a locating surface or hold them down at a machining or inspection fixture, with the tapped mounting holes simplifying fitment.

FAQ

What are the key figures of the AirTAC TTQ32X20SR?

Dia 32 mm bore, 20 mm stroke with +1.0/0 mm tolerance, single acting spring extend (pull-in), PT1/8 port, operating pressure 0.2-1.0 MPa, proof pressure 1.5 MPa (215 psi), -20 to +70 C, bumper cushion, roller stopper head, magnet fitted, no oil cushion and no self-lock.

How does the roller head differ from the lever roller versions?

The R roller is a direct rolling contact head, simpler and lighter-duty in feel, while the K lever roller on TTQ32X20SK and TTQ32X20SKF adds a lever and an adjustable oil shock absorber for a softer, tunable stop, and on the SKF code also a self-lock against spring-back. Size the bore with the impact load and speed charts in the catalog before choosing.