
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG40X20R from the TWG40 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The TWG40X20R is the roller-head version of the AirTAC TWG40 adjustable-height stopper cylinder. The flange mount lets you set the stopping height on the machine, and the roller at the rod end lets an incoming pallet or carton roll onto the stopper instead of hitting a fixed face, which spreads the impact and protects both the load and the cylinder. It is double acting on a 40 mm bore with a 20 mm stroke (tolerance +1.0/0 mm), raising and lowering the roller with air.
Air is supplied through a PT1/8 port at 0.15-1.0 MPa (proof pressure 1.5 MPa / 215 psi), and the series works from -20 to +70 C with a bumper cushion and no lubrication required, provided the air is filtered by a 40 um element. This code has no magnet, so confirm end positions externally or order an S-suffixed variant if you need position sensing.
| Order code | TWG40X20R |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Roller |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø40 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
Pick TWG40X20R when loads arrive fast enough that a roller contact is kinder than a fixed rod, but the stop is still firm enough not to need the K version's adjustable oil cushion. If you want a softer, dampened stop plus the option of the F self-lock that stops the lever pushing the load backwards, move to TWG40X20SK or TWG40X20SKF. For a fixed contact face choose TWG40X20SC (round rod) or TWG40X20SB (flat rod), and if 20 mm of lift is too short for your pallet size, the same roller head is available as TWG40X25R and TWG40X30R.
AirtacDistr lists every TWG40 order code with its price on one page at https://airtacdistr.com/products/airtac-twg40-stopper-cylinder
Raise the roller head into the pallet flow to halt loads; the rolling contact accepts the arriving pallet more gently than a fixed stop face.
Use the roller to queue boxes at a packing or case-sealing position, where boxes roll up to the stop without edge scuffing from a hard rod.
The adjustable flange height suits pick faces where tote height changes; the 20 mm lift clears the flow quickly when the stopper is lowered.
40 mm bore, 20 mm stroke (+1.0/0 mm tolerance), double acting, roller stopper, flange mounting with adjustable height, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no lubrication required, no magnet.
The roller lets the load roll slightly onto the stopper as it arrives, reducing impact, while round rod (C) and flat rod (B) present fixed faces. For a fully dampened stop, the K lever roller adds an adjustable oil cushion, and F adds a self-lock so the lever cannot spring back and push the stopped load backwards; neither applies to this code.