Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG40X30SKF from the TWG40 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
Order TWG40X30SKF when a stopped load must stay stopped: the F option locks the lever roller so it cannot spring back and push the workpiece backwards. On top of that locking lever you keep the K stopper benefits - rolling contact with the load and an adjustable oil cushion that softens the arrival - on a 40 mm bore with a 30 mm stroke and the S magnet fitted for position sensors.
The cylinder is double acting, so air both raises and lowers the stopper, and the flange with adjustable mounting height lets you set the stopper height on the machine. It runs on filtered air at 0.15-1.0 MPa through a PT1/8 port, tolerates -20 to +70 C, uses a bumper cushion and needs no lubrication.
| Order code | TWG40X30SKF |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 30 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø40 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
The F self-lock is only offered on the lever roller stopper, so inside the TWG40 range your real comparison is with TWG40X30SK: the same 30 mm lever roller and oil cushion but without the self-lock, for applications where back-push is not a risk. If your loads arrive gently and a simple rolling contact is enough, the TWG40X30SR drops both the cushion and the lock; the 40 mm bore also comes in 20 mm and 25 mm strokes.
AirtacDistr lists every TWG40 order code with its price on one page at https://airtacdistr.com/products/airtac-twg40-stopper-cylinder
Queued cartons press against the lever; the self-lock keeps it from springing up under the load and pushing the last box back up the line.
The stopper holds a workpiece at a lift interface, where the F self-lock matters because the load weight itself tries to kick the lever upward.
The magnet confirms stopper position to the controller, and the adjustable oil cushion lets you tune the catch for each product that runs down the line.
40 mm bore, 30 mm stroke (+1.0/0 mm tolerance), double acting, flange with adjustable mounting height, PT1/8 port, 0.15-1.0 MPa operating pressure (1.5 MPa / 215 psi proof), -20 to +70 C, bumper cushion, lever roller stopper with adjustable oil cushion and F self-lock, magnet fitted, no lubrication required.
The F option stops the lever from springing back and pushing the stopped load backwards - useful where the load weight or line pressure rests on the lever, such as accumulation holds. Without F, the TWG40X30SK gives the same 40 mm bore, 30 mm stroke, oil cushion and magnet but leaves the lever free to lift again.