verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG50 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG50X20R

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X20R from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke20 mm
  • StopperRoller
  • MagnetNo magnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ50 mm
$75.59 $83.09Save 9%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every TWG50 stroke, stopper and magnet on one page All TWG50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac TWG Stop Cylinder TWG50X20R

The AirTAC TWG50X20R is a double acting stopper cylinder from the TWG series with a 50 mm bore, a 20 mm stroke (tolerance +1.0/0 mm) and a roller stopper head. The flange body has an adjustable mounting height, so the machine builder sets the stop face to match the load line on the conveyor. With the roller end, the contact at the stop is a turning roller rather than a fixed rod edge, which suits stopping pallets, boxes and workpieces that continue to roll or slide against the stop.

Air is supplied through a PT1/8 port at 0.15-1.0 MPa (proof pressure 1.5 MPa / 215 psi), the fluid must be filtered by a 40 um element, and the cylinder runs from -20 to +70 C with a bumper cushion and no lubrication required. This code has no magnet, so end-of-stroke detection must be handled outside the cylinder; the piston rod is thicker than a standard profile to resist impact.

Airtac TWG Stop Cylinder TWG50X20R Technical Specifications

Order codeTWG50X20R
ProductAdjustable mounting height Stopper Cylinder
Stroke20 mm
StopperRoller
MagnetNo magnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

Pick TWG50X20R when you want a rolling contact at the stop face and no sensor wiring in the cylinder. If you need a magnetic piston for position switches, order the S variant TWG50X20SR instead. For a fixed rod end, the siblings are TWG50X20SC (round rod) and TWG50X20SB (flat rod); for the softest stop, TWG50X20K uses a lever roller with an adjustable oil cushion, and TWG50X20KF adds the F self-lock that stops the lever springing back and pushing the load backwards. Longer stops need TWG50X25R or TWG50X30R with 25 mm or 30 mm stroke. Size the bore with the impact load and speed charts in the catalog before ordering.

AirtacDistr lists every TWG50 order code with its price on one page at https://airtacdistr.com/products/airtac-twg50-stopper-cylinder

Applications

conveyor_belt

Pallet stopping on roller conveyors

The roller head and the adjustable flange height let you align the stop with the pallet edge, while double acting air raises and lowers the stopper between passes.

factory

Workpiece hold points on transfer lines

At 0.15-1.0 MPa with a bumper cushion, this code stops and releases parts in sequence without needing position switches, since no magnet is fitted.

settings

Manual staging and sorting stations

The 20 mm stroke lifts the stop just enough to clear or catch a load, and the no-lubrication design keeps maintenance to periodic checks of the 40 um filter.

FAQ

What are the key specifications of the TWG50X20R?

Double acting stopper cylinder, 50 mm bore, 20 mm stroke (+1.0/0 mm), roller stopper, adjustable-height flange mounting, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no magnet, lubrication not required.

Can I add position sensing to this cylinder later?

This code has no magnet (the S position in the ordering code is blank), so magnetic switches cannot detect the piston position. If sensing is required, order TWG50X20SR, where S adds the magnet for position sensors.