verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG50 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG50X25K

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X25K from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke25 mm
  • StopperLever roller, adjustable oil cushion
  • MagnetNo magnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ50 mm
$115.35 $122.85Save 6%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every TWG50 stroke, stopper and magnet on one page All TWG50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac TWG Stop Cylinder TWG50X25K

The K stopper changes how the load is caught. On the TWG50X25K a lever roller rides up on the arriving pallet and an adjustable oil shock absorber bleeds off the impact, so the catch is far softer than a rigid rod can give. The Dia 50 mm double acting body runs on 0.15-1.0 MPa air through a PT1/8 port, with a 25 mm stroke and bumper cushion inside.

Adjustable mounting height on the flange sets the roller to the line, and the oil cushion is then tuned to load weight and approach speed so heavy or fast pallets do not slam the mechanism. Like the rest of the series this code carries no magnet (no S suffix) and needs no lubrication, with JIS-standard construction. Use the catalog impact load and speed charts to size the bore before ordering.

Airtac TWG Stop Cylinder TWG50X25K Technical Specifications

Order codeTWG50X25K
ProductAdjustable mounting height Stopper Cylinder
Stroke25 mm
StopperLever roller, adjustable oil cushion
MagnetNo magnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

TWG50X25K sits above the plain tips: TWG50X25C round rod and TWG50X25B flat rod take impact rigidly, while TWG50X25R is a roller without the oil damper. Pick K when loads arrive quickly or unevenly and you want a damped, rolling catch. TWG50X25KF adds the self-lock lever on top of this same damping package, and TWG50X20K or TWG50X30K change only the lift height.

AirtacDistr lists every TWG50 order code with its price on one page at https://airtacdistr.com/products/airtac-twg50-stopper-cylinder

Applications

conveyor_belt

High speed pallet stops

The lever roller and adjustable oil cushion absorb the momentum of fast-arriving pallets, protecting both load and stopper mechanism.

forklift

Pallet hand-off zones

At transfer points where pallets are pushed or dropped onto the line, the rolling lever takes the first contact gently and lifts only 25 mm.

factory

Accumulation line gating

Tune the oil cushion per zone so back-pressure stopping stays smooth along a conveyor accumulator, one TWG50X25K per gate.

FAQ

What are the key figures of the TWG50X25K?

Dia 50 mm bore, 25 mm stroke (+1.0/0), double acting, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, 40 um air filtration, no lubrication required, lever roller stopper with adjustable oil cushion, no magnet, no self-lock.

Can the damping be tuned after installation?

Yes. The K end carries an adjustable oil shock absorber, so you can set the cushioning to match the load weight and approach speed at each stopper, rather than accepting one fixed deceleration. If the lever must also be prevented from springing back against the load, step up to TWG50X25KF.