
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X30SKF from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
As the self-locking version of the lever-roller TWG50, the TWG50X30SKF keeps the Dia 50 mm bore, 30 mm stroke and K-coded lever roller with adjustable oil shock absorber, then adds the F option that stops the lever from springing back and pushing the stopped load backwards. That difference matters on gravity conveyor lanes, where a pallet or box rolling into an unlocked lever can be shoved the wrong way after impact. The S magnet is still built in, so sensors continue to read both end positions.
The cylinder is double acting through PT1/8 ports: air raises and lowers the lever. It runs on 0.15-1.0 MPa with 1.5 MPa (215 psi) proof pressure and -20 to +70 C temperature, on air filtered by a 40 um element, and needs no lubrication. Flange mounting with adjustable height sets the stopper to the load line, and the thicker piston rod of the series resists impact better than a standard rod.
| Order code | TWG50X30SKF |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 30 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
The only ordering difference from TWG50X30SK is the trailing F, which adds the self-lock to the lever roller; pick the non-locking SK when rollback is not a concern on your line. Across the stopper options, C round rod and B flat rod give sliding contact, R roller and K lever roller roll with the load, and only the K stopper accepts the F self-lock, so the SKF pairing is the choice when loads arrive fast enough to rebound.
AirtacDistr lists every TWG50 order code with its price on one page at https://airtacdistr.com/products/airtac-twg50-stopper-cylinder
The F self-lock holds the lever in place after a pallet stops, preventing the sprung lever from pushing the load back up the slight decline of the lane.
In accumulation sections, the adjustable oil cushion absorbs the impact of each incoming carton while the magnet reports the stopper state to the line controller.
Workpiece carriers stopped at an assembly station stay put against the self-locked lever, and the Dia 50 bore is sized from the catalog impact charts.
Double acting, Dia 50 mm bore, 30 mm stroke with +1.0/0 mm tolerance, PT1/8 ports, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, lever roller with adjustable oil cushion and self-lock (F), built-in magnet, no lubrication needed on 40 um filtered air.
The F option adds a self-lock that stops the lever roller from springing back after impact, so a stopped pallet or box is not pushed backwards by the rebounding lever. On lines where loads arrive with force, this protects the stopped position; otherwise the SK without the lock performs the same lift function.