
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X20KF from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
TWQ32X20KF builds the adjustable oil cushion of the K lever roller stopper into a self-locking version. The F option stops the lever from springing back, so a load that leans or drives into the stopper cannot push it down and drift past the station. The cylinder itself is double acting on a 32 mm bore with a 20 mm stroke.
Everything else follows the TWQ32 pattern: a fixed mounting height through holes or the tapped holes at both ends, a PT1/8 air port, an operating range of 0.15-1.0 MPa, and sensor grooves on two sides of the body. No S magnet is ordered with this code, and the -20 to +70 C air supply needs no lubrication.
| Order code | TWQ32X20KF |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
This is the full-option, non-magnetic member of the 20 mm stroke group: TWQ32X20C, B and R stop hard on a rod or roller, TWQ32X20K adds the oil cushion but leaves the lever free, and only the F suffix here locks it against spring-back.
If a magnetic switch signal is required, order the same lever roller with S added to the code. If 20 mm is more stroke than the station needs, the K plus F combination also exists as TWQ32X10KF and TWQ32X15KF.
AirtacDistr lists every TWQ32 order code with its price on one page at https://airtacdistr.com/products/airtac-twq32-stopper-cylinder
Where accumulating product presses on the stopper, the self-lock holds the lever down so the load cannot shove it backwards out of position.
Receive pallets at a fixed height on the oil-cushioned lever roller, then rely on the lock to keep them square for the next transfer.
On slightly inclined or accumulating conveyor sections, the self-lock prevents stopped cartons from rolling the lever back and escaping the queue.
Dia 32 mm bore, 20 mm stroke with +1.0/0 mm tolerance, double acting, lever roller stopper with adjustable oil cushion and F self-lock, PT1/8 port, 0.15-1.0 MPa operation, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, no magnet fitted. Size the bore with the catalog impact load and speed charts.
The self-lock is an option offered for the lever roller stopper only. It keeps the lever from springing back under load, so the stopped workpiece cannot push it down and move backwards past the stop position. Codes without F, such as TWQ32X20K, use the same oil-cushioned lever but leave it free to rebound.