The AirTAC GFR300C08LJF3WT AirTAC Filter Regulator 1/4 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C08LJF3WT is an AirTAC GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in one body, with a single bowl and one adjustment point. This size 300 unit is threaded 1/4 in NPT and carries the 5 um filter element (code W) instead of the 40 um standard, a differential-pressure drain (the default drain type), and an embedded square gauge reading in bar. It is the low-pressure (L) regulator type, and no mounting bracket is fitted (code J).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um standard or 5 um (W) filtration, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | GFR300C08LJF3WT AirTAC Filter Regulator 1/4 in NPT |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
Filtered, regulated air for pneumatic clamps and tool-change cylinders on a CNC machining cell, with the 5 um element protecting precision valves from fine particulate.
Supplying clean, pressure-controlled air to pick-and-place cylinders and stopper gates along a packaging conveyor line, with water and dirt stripped out at one compact unit.
The low-pressure regulator type suits a laboratory pneumatic test bench where fixtures run at reduced supply pressure and need stable, filtered air.
Choose the size by port and flow: this unit is size 300 with a 1/4 in NPT port; larger sizes (400, 600) step up port and flow capacity. Published flow is given as curves, not a single rating, so confirm sizing against your application with us before ordering. This configuration has the 5 um (W) element rather than the 40 um standard - choose 5 um where downstream equipment needs finer particulate removal. Drain is differential-pressure (the default); automatic (A) and manual (M) drains are available in the family. The regulator is the low-pressure (L) type - its adjustment range is not published in the figures we hold, so confirm your set pressure with us. The gauge is the embedded square type reading in bar; MPa and psi scales and an external round gauge are options. Thread is NPT on this unit; PT (standard) and G are order options. No mounting bracket is included (code J).
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and sizing figures from the datasheet on request.
The W code fits the 5 um element instead of the 40 um standard, for finer particulate removal ahead of sensitive downstream equipment. The L code makes it the low-pressure regulator type; its adjustment range is not published, so confirm your set pressure with us before ordering. Maximum inlet pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C, non-freezing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.