The AirTAC GFR300C08MLJC2WTK AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C08MLJC2WTK is a filter regulator: it removes water and particulate from compressed air through a 5 um element and regulates downstream pressure in the low-pressure type, all in one body. This configuration has 1/4 in NPT ports, a manual-drain metal bowl that is emptied by hand, a round gauge reading in psi, and a built-in reverse (check) valve, and it is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR300 series. G-series filter regulators are available in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of PT, G or NPT thread, manual, automatic or differential-pressure drains, 40 um standard or 5 um fine filtration, gauge styles and scales, and standard or low-pressure regulation. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before you order.
| Model | GFR300C08MLJC2WTK AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
On a machining cell where clamps and swing cylinders are held at a gentle, stable pressure, this filter regulator cleans the air to 5 um and regulates it in one body, with the psi gauge giving the operator a direct readout at the fixture.
Bench-top process rigs and small coating stations running sensitive air tools at reduced pressure get fine 5 um water and particulate removal ahead of the regulator, and the manual drain suits a station someone attends each shift.
On a packaging line where cylinders and air-driven counters run at low set pressures, the built-in check valve backs up the downstream circuit if supply dips, and the 1/4 in NPT ports drop straight into the machine's air prep stack.
The choices on this unit are fixed by the code: size 300 with 1/4 in NPT ports, 5 um filtration (the W option, finer than the 40 um standard), a manual drain, the low-pressure regulator type, a round psi gauge, a check valve and no bracket. If you are stepping between sizes, move up or down the 200/300/400/600 ladder to match the port and flow your line needs. Manual drain means someone drains the bowl on a routine; choose automatic or differential-pressure drain where the unit is hard to reach. The regulation window for this low-pressure type is not published as a single figure, and flow is published as curves, not a rated number - send us your application and we will confirm sizing and the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow curve and sizing from the datasheet on request.
L marks the low-pressure regulator type; the exact regulation range for this type is not published in the catalogue, and we confirm it on request. M is the manual drain: the metal bowl is emptied by hand on a routine, unlike the automatic or differential-pressure drain options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.