The AirTAC GFR300C08MLJF2WG AirTAC Filter Regulator G1/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C08MLJF2WG is an AirTAC GFR300 filter regulator: one body that removes water and particulate from compressed air and reduces pressure in a single unit. This configuration carries a G1/4 (BSPP) port, a 5 um filter element, a manual drain, the low-pressure regulator type and an embedded square gauge reading in psi, and it is supplied without a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options across the family include automatic or differential-pressure drains, the 40 um standard element, alternative gauge scales (MPa, psi, bar), an external round gauge, a reverse/check valve, a mounting bracket and PT or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm sizing and any datasheet figure for your application.
| Model | GFR300C08MLJF2WG AirTAC Filter Regulator G1/4, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
Feeding filtered, regulated air to the cylinders and grippers on a carton-sealing conveyor, with the low-pressure regulator set inside the machine's working band and the 5 um element keeping particulate out of the valve stack.
Supplying clean air at reduced pressure to bench-top pneumatic test rigs and instruments, where the 5 um grade protects sensitive components and the square psi gauge gives a direct reading at the rig.
Conditioning air ahead of paint and powder-coating guns, where the 5 um element and manual drain help keep water and particles out of the finish on low-pressure spray circuits.
Pick the size and port against the air consumption of the machine: this unit is size 300 with a G1/4 port, and larger sizes in the family give larger ports and more flow. The 5 um element (code W) suits work needing finer filtration than the 40 um standard; the manual drain here must be bled periodically, while automatic (A) and differential-pressure drains are available elsewhere in the family. The embedded square gauge is fitted in a psi scale; MPa and bar scales and an external round gauge are options. Thread is G (BSPP); PT is the standard thread and NPT can be ordered. This code omits the mounting bracket, which is optional. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and the full datasheet figures for this unit on request.
The M in the code specifies a manual drain, which you bleed periodically to remove collected condensate. The GFR family also offers automatic (A) and differential-pressure (standard) drains, so you can order an alternative if the installation cannot be drained by hand.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.