The AirTAC GFR300C15ALJC2TK AirTAC Filter Regulator NPT1/2 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C15ALJC2TK is an AirTAC GFR300 filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This configuration carries a 1/2 in NPT port, an automatic drain that removes collected condensate without manual intervention, a 40 um filter element, the low-pressure regulator type, a round pressure gauge reading in psi, and a reverse/check valve fitted. The bowl on the 300 size is polycarbonate, and no mounting bracket is included (code J).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, drain choices of differential-pressure, automatic or manual, an optional 5 um element (code W), gauge scales in MPa, psi or bar, and PT, G or NPT thread options. Flow is published as curves rather than a single rated figure, so we confirm datasheet figures on request.
| Model | GFR300C15ALJC2TK AirTAC Filter Regulator NPT1/2 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Feeds a fixture-clamping manifold that runs at reduced set pressure, with the automatic drain keeping condensate out of the clamp cylinders and the check valve holding the circuit if upstream supply dips.
Serves as the point-of-use filter regulator on a packaging machine's 1/2 in air drop, cleaning the supply and setting a stable low pressure for the machine's actuator bank.
Mounted in a machine-tool's air preparation panel to condition the supply before directional valves and air cylinders, with the psi gauge giving the operator a local set-point readout.
Pick the size by port and flow demand: this unit is size 300 with a 1/2 in NPT port; step down to 200 or up to 400/600 as your circuit requires. Drain type is a real choice: automatic (this unit), manual (M), or the differential-pressure default. Filter grade is 40 um standard; specify code W for 5 um where finer filtration is needed. Gauge: this unit has a round gauge with a psi scale; embedded square gauges and MPa or bar scales are alternatives. Thread: PT is the standard, with G and NPT as order options. Bracket: code J means none is included. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this family as curves rather than a single rated figure, so we do not quote a number. Send us your application details and we will confirm the flow figures from the datasheet on request.
It is a regulator variant intended for lower set pressures than the standard type. The exact adjustment range for the low-pressure type is not published in the material we hold, so we confirm it on request. The maximum inlet pressure remains 1.0 MPa (145 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.