The AirTAC GFR300C15ALJNT AirTAC Filter Regulator 1/2 in NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C15ALJNT is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This unit is built on the GFR300 size with a 1/2 in NPT port, an automatic drain that expels collected condensate without manual attention, a 40 um standard filtration element, and the low-pressure regulator type. No gauge is fitted and no mounting bracket is included, and the bowl on this configuration is metal.
This is a genuine AirTAC part. The GFR300 series sits in the middle of the GFR range, which spans 200, 300, 400 and 600 sizes with port options from 1/8 in to 1 in and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR300C15ALJNT AirTAC Filter Regulator 1/2 in NPT |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Filtering and regulating the air feeding clamping and press cylinders on a stamping cell, where the circuit calls for a low-pressure regulated supply downstream of the compressor ring main.
Conditioning air ahead of carton-sealing, wrapping and case-erector actuators on a packaging line, with the automatic drain keeping condensate out of the valves between shifts.
Providing filtered, reduced-pressure air to a pneumatic test bench or fixture panel, where the operator sets a stable supply pressure for the device under test.
Size and port set the air capacity: the 300 size with a 1/2 in NPT port suits lines running larger pneumatic loads, while smaller 200-size bodies with 1/8 in or 1/4 in ports serve compact circuits. Drain type is a real choice in this family: automatic (this unit), manual, or differential-pressure. Filter grade is 40 um standard; specify W for the 5 um element if finer filtration is needed. Gauges (round or square, with MPa, psi or bar scales) and a mounting bracket are order options and are not fitted here. Thread is NPT on this model; PT is the standard and G (BSPP) is also available to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR300 as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures on request.
The automatic drain on this GFR300 expels collected condensate on its own, which suits installation points that are not checked daily. The GFR300 family is also available with manual or differential-pressure drains if you prefer to control draining yourself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.