The AirTAC GFR600C20AJF1TK AirTAC Filter Regulator NPT3/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR600C20AJF1TK is an AirTAC GFR600 filter regulator: one body that removes water and particulate from compressed air and holds downstream pressure steady. This size 600 unit carries a 3/4 in NPT port, an automatic drain that clears collected condensate from the aluminium alloy bowl without manual attention, a 40 um standard filter element, an embedded square gauge scaled in MPa, and a built-in reverse (check) valve. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C (non-freezing). No mounting bracket is fitted (code J).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, drain choices (differential-pressure, automatic or manual), 40 um or 5 um (W) filtration, gauge and scale options, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so we confirm datasheet and flow figures on request.
| Model | GFR600C20AJF1TK AirTAC Filter Regulator NPT3/4 |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Conditions and regulates the compressed-air drop feeding clamps, air tools and blow-off points at a machining cell, keeping chips and condensate out of the circuit while holding a set pressure.
Sits at the feed to cylinders and grippers on a packaging or palletising conveyor, filtering water and debris from the shop air and holding a steady pressure so pick-and-place motions stay repeatable.
Supplies filtered, regulated air to solenoid and pneumatically actuated process valves on a plant skid, with the check valve holding downstream pressure if the supply side is interrupted.
Sizing starts at the port: this unit steps up to 3/4 in NPT on the 600 frame, the largest in the GFR range - match it to your line size and the flow the circuit needs. The automatic drain suits unmanned or hard-to-reach installations; manual and differential-pressure drains are available in the family if you prefer operator control. The 40 um element is the standard grade; specify the W code for 5 um where finer filtration is required. The square gauge reads in MPa, with psi and bar scales and an external round gauge among the options. Thread here is NPT, with PT (the standard) and G as orderable alternatives. Flow is published as curves, not a single rating - ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your line size and air demand and we will confirm the datasheet flow figures for this 3/4 in unit on request.
The A code in GFR600C20AJF1TK means the drain expels collected condensate from the bowl automatically, which suits unmanned compressor rooms or units mounted in awkward positions. If you prefer operator-controlled draining, the same family is available with manual (M) or differential-pressure (blank) drains.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.