The AirTAC GFR600C20JC2G AirTAC Filter Regulator G3/4, 40 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600C20JC2G is a size-600 filter regulator: it removes water and particulate from compressed air and sets downstream pressure in one body. This configuration carries a G3/4 port with G (BSPP) thread, a 40 um standard filter element, and a differential-pressure drain that bleeds condensate automatically whenever the pressure differential across the element is high enough. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi), a round external gauge scaled in psi is fitted so the setpoint can be read directly, and no mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. At size 600 the bowl is aluminium alloy.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600, so larger ports and higher flow capacity are available in the same family if your air demand grows. Related options include a 5 um element (code W), automatic or manual drains, alternative gauge scales in MPa or bar, and PT or NPT thread variants. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GFR600C20JC2G AirTAC Filter Regulator G3/4, 40 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Feeding clean, pressure-set air to spray booths and air-assisted applicators, where the 40 um element strips water and pipe scale and the regulator holds a steady setpoint for consistent finish work.
Supplying filtered and regulated air to conveyor gate and diverter cylinders in a dusty, heavy-duty environment, where the size-600 aluminium alloy bowl stands up to plant conditions and the psi gauge lets maintenance verify settings at a glance.
Conditioning the air feeding a filling and capping machine's valve manifold, with the differential-pressure drain keeping condensate off the bowl bottom between changeovers and the regulator pinning the pressure the manifold was designed around.
Size and port are the first choice: the 600 frame with its G3/4 port sits at the top of the GFR range, so step down to 200/300/400 only if your line's air demand is smaller - match the size to required flow, not to pipe convenience. Drain type is a real decision: the differential-pressure drain fitted here needs no daily attention, but an automatic drain (code A) empties the bowl on a cycle and a manual drain (code M) gives full operator control. The 40 um element suits general plant air; specify the 5 um W element only where downstream valves or instruments need finer filtration. The fitted round gauge is scaled in psi; MPa and bar scales exist if your team reads metric. Thread is G (BSPP) on this unit, with PT and NPT available to order, and brackets are optional on GFR units.
One honest note before you order: AirTAC publishes flow for this series as curves, not as a single rated number, so we cannot quote a rated flow figure here. Send us your application's flow and pressure requirements and we will confirm sizing against the datasheet before you commit.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a rated flow number. Send us your required flow and working pressure and we will confirm the sizing against the datasheet on request before you order.
The differential-pressure drain fitted here is the default: it discharges condensate automatically when the pressure drop across the 40 um element rises, so it suits continuously running plant air with no operator intervention. Choose the automatic drain (code A) for intermittent or lightly loaded lines where differential flushing is infrequent, or the manual drain (code M) where you want an operator to empty the bowl on a fixed schedule.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.