The AirTAC GFR600C20JC2WG AirTAC Filter Regulator G3/4, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600C20JC2WG is a size-600 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration carries a G3/4 (BSPP) port, a 5 um filter element for finer filtration than the standard 40 um grade, and a differential-pressure drain that bleeds condensate automatically whenever the pressure differential across the element is high enough. The fitted round pressure gauge reads in psi, and the standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The size-600 drain bowl is aluminium alloy.
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) filtration, gauge and scale options, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GFR600C20JC2WG AirTAC Filter Regulator G3/4, 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Conditioning and regulating the main compressed-air feed on a 3/4-inch header that serves multiple production cells, with the 5 um element protecting downstream equipment from fine particulate.
Supplying filtered, regulated air to pneumatic cylinders and grippers on an assembly line, with the psi gauge giving operators a local setpoint readout at the machine.
Feeding blowoff nozzles and conveyor tracking cylinders on a packaging line, where the differential-pressure drain keeps condensate moving out without a manual dump routine.
Step up or down through the GFR sizes (200/300/400/600) against the port and flow your line needs; this unit is the 600 size with a G3/4 port for larger supply lines. Choose the drain to match maintenance practice: differential-pressure (this unit) drains on pressure differential, automatic drains on a timer-free cycle, and manual requires operator intervention. Pick 40 um for general protection or 5 um (this unit, code W) where finer particulate control matters. Gauge scale (MPa, psi or bar - this unit is round, psi), thread (PT standard, G or NPT to order) and bracket are all decodable options.
Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a flow number here. Send us your line pressure, downstream demand and acceptable pressure drop, and we will confirm the sizing from the datasheet on request.
The blank drain position in the code GFR600C20JC2WG decodes to the differential-pressure drain, which discharges condensate automatically when the pressure differential across the element rises; automatic (A) and manual (M) drains are order options. The W in the code selects the 5 um filter grade instead of the 40 um standard, for finer particulate removal.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.