The AirTAC GFR600C20MLF2WT AirTAC Filter Regulator NPT3/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600 series combines water and particulate filtration with pressure regulation in a single body. This unit is built for 3/4 in NPT ports and carries a 5 um filter element (code W), a manual drain for periodic bowl emptying, and an aluminium alloy bowl. The regulator is the low-pressure type, fitted with an embedded square gauge scaled in psi, and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, PT as standard and G or NPT as order options, with drain, filter-grade, gauge and bracket choices across the range. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR600C20MLF2WT AirTAC Filter Regulator NPT3/4 |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Filtered, regulated supply air to the seal cylinders and hold-down clamps on a carton erecting and taping line, with the 5 um element keeping particulate out of valve seals.
Supplies cleaned air to the air-blast nozzles that clear caps and labels from a bottling conveyor, with the manual-drain bowl emptied during scheduled changeovers.
Regulates supply air for laboratory automation manifolds and pneumatic actuators where a lower set pressure and 5 um cleanliness are required, with the psi gauge reading out the set point.
Size steps through 200, 300, 400 and 600, so match the series to the flow your line needs - this unit is the largest, with a 3/4 in NPT connection. Drain comes as manual (this unit), automatic or differential-pressure; filter grade is 40 um standard or 5 um with the W code (this unit). Gauges are embedded square as standard with an optional external round gauge, scaled in MPa, psi or bar - this unit carries the square psi gauge. Threads are PT as standard with G (BSPP) and NPT as order options, and a mounting bracket is included. Flow is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR600 series as curves rather than a single rated figure, so we do not quote a number here. Send us your flow and pressure requirements and we will confirm the datasheet figures and correct sizing on request.
This unit is specified with a manual drain: the bowl is emptied by hand at intervals, which suits installations checked on a regular schedule. If the unit is hard to reach or runs unattended, the automatic or differential-pressure drain options on the same series are worth considering - ask us to quote the variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.