The AirTAC GFR600C20MLJC2G AirTAC Filter Regulator G3/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR600C20MLJC2G is an AirTAC GFR600 filter regulator: water and particulate filtration plus pressure regulation combined in a single body, sized for G3/4 (3/4 in) ports. This configuration is the low-pressure type with a manual drain, a 40 um standard filter element, a round pressure gauge reading in psi, and no mounting bracket. At size 600 the bowl is aluminium alloy. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and options include automatic, manual or differential-pressure drains, a 5 um element (code W), embedded square or external round gauges with MPa, psi or bar scales, and G or NPT threads in place of the PT standard. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR600C20MLJC2G AirTAC Filter Regulator G3/4 Low-Pressure |
|---|---|
| Series | GFR600 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| C2 | Port size See datasheet. This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · See datasheet · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-C2 (two-unit set) |
Supplies filtered, regulated air to pneumatic clamps and fixtures on a machining cell where the actuation pressure sits below the standard regulator band.
Feeds filtered air to cylinder-driven sealing and forming stations on a packaging line that runs its actuators at reduced pressure.
Provides filtered, regulated air to the gate cylinders on a sorting conveyor whose diverters operate at low pressure.
The real choices in this family are decodable from the code. Step through sizes 200/300/400/600 and ports 1/8 to 1 inch to match the pipe and the air demand of your line. Choose the drain: manual (as here), automatic, or differential-pressure. Pick the filter grade: 40 um standard or 5 um with code W. Select the gauge - embedded square as standard or external round, with MPa, psi or bar scales - and the thread: PT is the standard, with G and NPT as order options. Brackets are optional. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this family as curves rather than a single rated figure, so we do not quote a number. Tell us your line pressure and air demand and we will confirm the flow from the datasheet on request.
A manual drain means an operator opens the drain to release collected water, which suits attended installations. The same GFR600 body is also available with an automatic or differential-pressure drain; the drain type is part of the model code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.