
The AirTAC 4V120-06BI Solenoid Valve, 5/2-way, PT1/8, DC24V, grommet entry (4V12006BI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V120-06BI is a 5/2-way double-solenoid valve built on the compact 4V100 aluminium body. It directs compressed air to double-acting cylinders and actuators, and its memory function means the spool stays in the last pulsed position even when power is removed—held by land friction and balanced pressure, with no holding current needed. This makes it ideal for sequences where you want the actuator to remain stationary between signals without keeping a coil energised.
This SKU comes with a DC24V coil (2.8 W) and a grommet-style electrical entry with a 0.5 m pre-wired flying lead, so you can wire it in quickly without a separate terminal box. The 1/8" PT ports deliver an effective area of 10.2 mm² (Cv 0.6), suiting small-bore cylinders around Ø16–32 mm. Response time is ≤0.05 s, and the IP65 enclosure holds up in washdown and dusty environments.
| Model | AirTAC 4V120-06BI Solenoid Valve, 5/2-way, PT1/8, DC24V, grommet entry (4V12006BI) |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 175 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The memory spool holds the gripper closed after the pick pulse, so the part stays secure during transfer without keeping the coil energised. The 0.5 m grommet lead simplifies wiring on a moving Z-axis.
Pulse the valve to swing a diverter gate; it stays in position until the opposite pulse arrives. The 10.2 mm² effective area gives crisp actuation on Ø20–25 mm gate cylinders.
Double-solenoid memory keeps a fixture clamped after an E-stop or end-of-cycle power-down, so the workpiece doesn't shift. The IP65 rating protects against coolant mist in CNC enclosures.
Pick the 4V120-06BI when your circuit needs a 5/2 double-solenoid valve that remembers its last state through a power cycle. The memory behaviour eliminates the need for a continuous holding signal, which cuts energy use and simplifies the ladder logic for clamp/unclamp or divert/retract steps. If your cylinder is larger than Ø32 mm or you need a higher cycle rate, step up to the 4V200 series (Cv 1.0) for more flow.
When replacing an existing valve, match five points: body size 4V100, function 20 (double solenoid 5/2), port thread 1/8" PT, coil voltage DC24V, and electrical entry grommet. If you are building a multi-station manifold, confirm the base is compatible with the 4V100 series—the valve drops onto a common sub-base, and you can mix single and double solenoids on the same rail.
AirtacDistr lists every 4V120-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v120-06-solenoid-valve
Quick checklist
No. The double-solenoid design is a memory valve. Once pulsed, the spool stays put through land friction and balanced pressure—no holding current, no spring return, and no magnetic latching. It only draws power during the brief shift pulse.
With an effective area of 10.2 mm² (Cv 0.6), it suits double-acting cylinders roughly Ø16–32 mm for typical automation speeds. If you need faster cycling on a Ø32 mm bore or are driving a Ø40 mm cylinder, consider moving up to the 4V200 series (Cv 1.0).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.