
The AirTAC 4V120-06FI Solenoid Valve, 5/2-way, PT1/8, DC12V, grommet entry (4V12006FI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V120-06FI is a 5/2-way double-solenoid valve on the compact 4V100 body, directing compressed air to double-acting cylinders and rotary actuators. Because it uses two solenoids, the spool stays in its last pulsed position even when power is removed—a memory function that eliminates the need for a continuous holding signal and reduces coil heat build-up in intermittent-duty fixtures.
This specific SKU arrives with a DC12V coil drawing just 2.5 W and a grommet-style electrical entry that provides a 0.5 m flying-wire lead, simplifying wiring into tight DIN-rail panels. At 175 g, it offers a 10.2 mm2 effective area (Cv 0.6) and a response time of 0.05 s or less, suiting it to ~O16-32 mm bore cylinders on pick-and-place heads where holding position during an E-stop cycle is required.
| Model | AirTAC 4V120-06FI Solenoid Valve, 5/2-way, PT1/8, DC12V, grommet entry (4V12006FI) |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 175 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The 12 V DC coil and memory function allow a small clamping fixture to hold its grip after the control signal is removed, saving battery power on AGVs or portable assembly tools.
With a 10.2 mm2 effective area and 5 Hz max frequency, this valve cycles small ~O20 mm bore cylinders on desktop pick-and-place units, and the grommet lead simplifies cable management.
Use the memory hold to keep a small parts diverter gate in the last commanded position during a machine pause, avoiding the need to re-home the actuator on restart.
Choose the 4V120-06FI when your small automation cell needs a 5/2 valve that remembers its last state without constant power. The 12 V DC grommet version is particularly useful in mobile or battery-backed systems where 24 V is not available. If your cylinder is larger than 32 mm bore or you need faster cycling above 5 Hz, step up to the 4V200 series (Cv 1.0) for higher flow.
For a direct replacement, match five points exactly: the 4V100 body size, the double-solenoid (20) memory function, 1/8" PT ports, a DC12V coil, and the grommet (I) entry. This valve can also be mounted on a 4V100 manifold base to build a compact valve terminal for multiple axes.
AirtacDistr lists every 4V120-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v120-06-solenoid-valve
Quick checklist
Its 10.2 mm2 effective area (Cv 0.6) is well-matched to double-acting cylinders in the ~O16-32 mm bore range. For a 40 mm bore or larger, moving to the 4V200 series (Cv 1.0) will give you a more responsive cycle time.
The double-solenoid design pulses the spool to one side or the other. Once shifted, the spool is held in place by land friction and balanced air pressure, not by a spring or magnet. It will stay in that position indefinitely until the opposite solenoid is pulsed, even if main power is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.