
The AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008B-AM-W) is a genuine 5/2-way single solenoid (spring return) solenoid valve with PT1/4 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V21008B-AM-W is a 4V210-08B built with two factory options: an AMISCO solenoid coil (-AM) and an external-pilot supply (-W). As a 5/2 single-solenoid valve it energises to send air to one side of a double-acting cylinder while the other side exhausts, and when the coil is de-energised an internal spring returns the spool - so your electrical signal must stay on for as long as you want the cylinder extended. Flow sits in the 4V200 mid-body class: 17 mm² effective area (Cv 1.0), enough for bores around O32-50 mm at typical cycle speeds.
The -W external-pilot version takes its pilot air from a separate external port instead of bleeding it internally off the main line. That keeps the spool switching cleanly on low-pressure mains, vacuum lines and circuits where an internal tap would starve the pilot. The 24V DC AMISCO coil is wired through a terminal box; confirm the exact AMISCO coil rating with us when you order. The 4V210 body weighs 220 g and responds in 0.05 s or less.
| Model | AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008B-AM-W) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 220 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The external pilot port lets the spool shift even when main-line pressure is weak, making this -W build a practical choice on vacuum generators and low-pressure actuation legs where an internally piloted valve can stall mid-travel.
With Cv 1.0 and 17 mm² effective area, the valve runs O32-50 mm double-acting cylinders on assembly and automation stations, with spring return giving a defined fail-to-home stroke whenever the 24V DC signal drops.
The 5/2 single-solenoid layout with 0.05 s response suits packaging and material-handling fixtures - clamps, part pushers and gate diverters that must retreat automatically when the control signal is interrupted.
Choose this SKU when you specifically need the external-pilot -W build - for example on low-pressure mains or vacuum circuits where an internally piloted valve may not shift. If your supply is a normal 0.15-0.8 MPa line, the standard internally piloted 4V210-08B does the same job. Step down to the 4V100 (Cv 0.6) for small bores, or up to the 4V300 (Cv 1.65) for larger cylinders or faster cycles; pick a double-solenoid 4V220 when you need the spool to hold its last position, or a 4V230C/E/P 5/3 for mid-position hold, float or pressurise. Single valves mount directly, or stack several on a common manifold base. For replacement matching, confirm all five points: 4V200 body, function 10, 1/4" PT port, 24V DC coil, terminal entry - plus the -AM-W options themselves.
Quick checklist
It is a 5/2 spring-return valve rated at 17 mm² effective area (Cv 1.0), sized for double-acting cylinders and actuators in the O32-50 mm range. Unlike the standard 4V210-08B, the -W variant draws pilot air from a dedicated external port rather than internally from the main supply - so you plumb a separate pilot line, and the valve still switches dependably on low-pressure or vacuum mains. Operating pressure is 0.15-0.8 MPa.
The -AM suffix means this 4V210 body carries an Italian AMISCO solenoid coil instead of the standard AirTAC coil; the body, ports, flow and 5/2 spring-return function are unchanged. The ordered voltage is 24V DC with terminal-box entry, but our datasheet does not list the AMISCO coil's draw, so confirm the exact wattage with us before wiring or sizing power supplies.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.