
The AirTAC 4V220-06CI Solenoid Valve, 5/2-way, PT1/8, AC110V, grommet entry (4V22006CI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V220-06CI is a 5/2-way double-solenoid pneumatic directional valve built on the mid-flow 4V200 body. It directs compressed air to double-acting cylinders and actuators, and because it is a double-solenoid (memory) model, the spool stays locked in its last pulsed position even if power is cut—no holding current is needed, and the mechanism relies on spool friction and balanced pressure, not magnets.
This specific configuration arrives with an AC110V coil drawing 4.5 VA and a grommet-style electrical entry that provides a pre-wired 0.5 m flying lead for fast DIN-rail wiring. With an effective area of 17.0 mm2 (Cv 1.0, catalog figure for the 4V210-08) and a response time of 0.05 s or less, it suits double-acting cylinders in the ~32–50 mm bore range, delivering crisp, repeatable shifts in general automation tasks.
| Model | AirTAC 4V220-06CI Solenoid Valve, 5/2-way, PT1/8, AC110V, grommet entry (4V22006CI) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 320 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The memory function holds a diverter gate in its last commanded position during a line stop, preventing product mix-up when power is cycled.
Controls a double-acting clamp cylinder; the valve remembers the clamp state after a pulse, freeing the PLC from maintaining a continuous output.
A workhorse for mid-size pneumatic actuators on pick-and-place units, pushers, and sorting mechanisms where a 1/8-inch port and Cv 1.0 (catalog figure for the 4V210-08) flow are sufficient.
Step down to the 4V100 series (Cv 0.6) when driving compact cylinders below ~25 mm bore, or move up to the 4V300 (Cv 1.65) for larger bores or faster cycle rates. Choose this double-solenoid memory function when the valve must hold its last position through an E-stop or power cycle without a spring return; if a spring-return action is preferred, the single-solenoid 4V210 is the alternative. For a complete manifold assembly, the 4V200 body mounts directly onto a common base, simplifying multi-valve installations.
When replacing an existing valve, match five points: confirm the 4V200 body size, the 1/8-inch port, the double-solenoid 5/2 function, the AC110V coil voltage, and the grommet flying-lead entry. The PT (Rc) tapered thread ensures a reliable metal-to-metal seal on standard piping.
AirtacDistr lists every 4V220-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v220-06-solenoid-valve
Quick checklist
With a Cv of 1.0 and an effective area of 17.0 mm2, it is well-matched to double-acting cylinders in the ~32–50 mm bore range. For smaller cylinders, a 4V100-series valve (Cv 0.6) may offer more precise control; for larger or faster cylinders, a 4V300 (Cv 1.65) is a better fit.
The spool is shifted by a momentary electrical pulse and stays in that position purely through land friction and balanced air pressure. No spring, holding current, or magnetic latch is involved. This means the valve consumes zero power while holding, but it is not a safety-rated holding device—add a pilot-operated check valve if the application involves a suspended load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.