verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 4V Series · 5/3-way Solenoid Valve

AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI)

The AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.

  • Valve type5/3-way
  • Function5/3 double solenoid — Closed center
  • Port sizePT1/8
  • Effective area13.6 mm²
  • Flow (Cv)0.8
  • Series4V200
$51.14 $58.64Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 4V230C-06 stroke, mounting and version on one page All 4V230C-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI)

The 4V230C-06BI is a 5/3-way double-solenoid pneumatic directional valve that controls double-acting cylinders and actuators with a closed center position. When both solenoids are de-energized, all ports are blocked, trapping air on both sides of the piston to hold the cylinder in place—ideal for mid-stroke stops. This DC24V variant comes with a grommet-style electrical entry, providing a pre-wired 0.5 m flying lead for fast DIN-rail installation.

Built on the compact 4V200 aluminum body, this valve delivers an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08) and suits cylinders in the ~Ø32-50 mm range. The sliding-spool design operates from 0.15-0.8 MPa with a response time of 0.05 s or less, and the IP65-rated enclosure ensures reliable switching in dusty or washdown environments. Its 3.0 W DC coil runs cool during extended holding cycles.

Closed-center stopping is not a load-holding or safety function: air leakage can let the cylinder creep, so add a pilot check valve or a mechanical brake where a load must be held.

AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI) Technical Specifications

ModelAirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI)
Series4V200 solenoid valve (spool type)
Valve type5/3-way
Function5/3 double solenoid — Closed center
Port sizePT1/8
Exhaust portPT1/8
Effective area (Cv)13.6 mm² (Cv 0.8)
FluidAir (filtered by 40µm element)
Pilot typeInternal / external pilot
Operating pressure0.15 – 0.8 MPa
Proof pressure1.2 MPa
Max frequency3 cycle/sec
Response time≤ 0.05 s (activating)
Temperature-20 to +70 °C
Body materialAluminum alloy
Weight360 g

Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Flow & Coil Options

Effective area13.6 mm²
Flow coefficientCv 0.8
Response time≤ 0.05 s
Coil powerAC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W
Protection / insulationIP65 (DIN40050), B-class
Voltage optionsDC24V, DC12V, AC110V, AC220V
Manual overrideYes (locking / non-locking)

Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.

Model Code: AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI)

4VSolenoid valve, spool type, 4-series.
2Body size (4V200) — sets port & flow.
3Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3.
-06Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2".

Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.

Where the AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI) Is Used

precision_manufacturing

Mid-Stroke Clamping

The closed-center spool blocks all ports at rest, letting a clamp cylinder stop and hold a workpiece at an intermediate position for gluing or welding.

conveyor_belt

Vertical Lift Pause

On a small vertical lift, de-energizing both solenoids traps air in the cylinder, pausing the carriage mid-lift. Always add a mechanical brake for suspended loads.

build

Assembly Station Indexing

Use the 4V230C-06BI to index a double-acting actuator to a precise center stop in a rotary assembly fixture, holding position while a downstream operation completes.

Is the AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI) the Right Valve?

Choose the 4V230C-06BI when your application needs a 5/3 closed-center function on a 1/8-inch ported base. The closed center is the go-to choice for vertical or inclined loads where you must pause the cylinder mid-stroke without it sagging—but remember, for true load-holding safety, always pair it with a pilot-operated check valve at the cylinder ports. If your cylinder bore is below Ø25 mm, the smaller 4V100 series (Cv 0.6) may offer a better match; for bores above Ø63 mm or faster cycle rates, step up to the 4V300 body.

When replacing an existing valve, match five points exactly: 4V200 body size, 5/3 closed-center function, 1/8-inch PT port, DC24V coil voltage, and grommet-style electrical entry. This model can be mounted individually or ganged on a manifold base, simplifying multi-station pneumatic panels without extra plumbing.

AirtacDistr lists every 4V230C-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v230c-06-solenoid-valve

Quick checklist

  • ✓ Required flow (Cv) for cylinder & speed
  • ✓ Function: single / double / 5-3 center
  • ✓ Coil voltage (DC24 / AC220 …)
  • ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
  • ✓ Single valve or manifold base?
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 0.8 MPa operating pressure.
  • check Match coil voltage to your controller output.
  • check Use the manual override to test before powering.
  • check Fit silencers or fittings to the exhaust ports.
  • check Wiring by qualified personnel per AirTAC docs.

AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI) FAQ

With an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08), this valve is well-matched to double-acting cylinders in the ~Ø32-50 mm range. It provides smooth, controlled motion for mid-sized actuators in general automation. For very small cylinders (below Ø25 mm), a 4V100 series valve may give finer control; for larger, faster cylinders, consider the 4V300 series.

The 4V230C-06BI is a double-solenoid valve with a closed center spool. When both solenoids are off, all cylinder ports are blocked, trapping air and holding the piston in its last commanded position. This is useful for mid-stroke stops, but it is not a safety holding device—external pilot-operated check valves or mechanical brakes are required for critical load-holding applications.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC 4V230C-06BI Solenoid Valve, 5/3-way, closed center, PT1/8, DC24V, grommet entry (4V230C06BI)

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 4V230C06BI and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.