
The AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06C-W) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V230C-06C-W is a 5/3-way double-solenoid valve with a closed center, built on the mid-size 4V200 body with 1/8" PT ports. With both coils de-energised the spool sits at center and blocks all five ports, so a double-acting cylinder connected to it keeps whatever position it was in - useful where a slide or clamp must pause mid-stroke under control. The -W suffix marks the external-pilot version: pilot air is fed through a separate external pilot port rather than tapped from the main supply, so spool shifting stays dependable even when line pressure runs low or the circuit operates at reduced pressure.
Flow capacity sits at an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08), the 5/3 rating for this body, with switching response at 0.05 s or faster. The AC110V coil draws 4.5 VA and wires into the built-in terminal box, and the whole assembly weighs 360 g. It is a natural match for double-acting cylinders in roughly the O32-50 mm bore range, carries an IP65 (DIN40050) enclosure, and accepts a manual override. The aluminum body can also mount on a base to build an integrated manifold valve group.
Closed-center stopping is not a load-holding or safety function: air leakage can let the cylinder creep, so add a pilot check valve or a mechanical brake where a load must be held.
| Model | AirTAC 4V230C-06 Solenoid Valve, 4V200 Series (4V230C06C-W) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
A closed-center 5/3 stops a double-acting clamp cylinder partway and blocks both cylinder ports, holding the workpiece while downstream operations run. The external pilot keeps the spool shifting reliably even if main pressure dips during peak plant demand.
Pushers and product stops on packaging lines often need a hold position rather than just extend/retract. At 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) this valve pairs well with O32-50 mm bores, and the AC110V 4.5 VA coil suits standard control panels wired at the terminal box.
Where the main line cannot guarantee enough pressure to tap off internally for piloting, the -W external pilot supply lets the 4V230C-06C-W switch cleanly at 0.05 s response, keeping test rigs and low-pressure process actuators cycling.
Choose this valve when the actuator must stop and stay put between signals - closed center is the right 5/3 choice for that, while exhaust center (30E) lets the cylinder drift free and pressure center (30P) presses both sides. If your bore is small and speed demand is light, the 4V100 at Cv 0.6 may suffice; if you need more flow for a larger bore or quicker cycle, step up to the 4V300 at Cv 1.65. The external-pilot -W version is the one to specify when supply pressure is low, unstable, or vacuum-adjacent - a standard internally-piloted valve can fail to shift there. Consider a manifold base if several valves share one footprint.
When replacing an existing unit, match five points exactly: body size (4V200), function code (30C for closed center), port and thread (1/8" PT - order a G-thread variant if your fittings are BSPP parallel), coil voltage (AC110V here), and electrical entry (terminal box, not the grommet lead). Confirm the -W external-pilot option as well, since it changes the porting layout.
Quick checklist
It directs compressed air to double-acting cylinders and actuators in the ~O32-50 mm bore range. As a 5/3-way valve its effective area is 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08), compared with 17.0 mm2 (Cv 1.0) for the 5/2 valves in the same 4V200 body, because the center-position flow paths reduce the through-flow. Maximum cycling frequency is 3 cycles per second versus 5 for the 5/2.
With neither coil energised, the closed center blocks all ports, so the cylinder holds its last position. Note the hold is functional, not a certified safety brake - for suspended or hazardous loads add a pilot-operated check valve at the cylinder ports or a mechanical brake. The -W option means pilot air comes from a separate external port instead of the main supply, so the spool still shifts reliably when line pressure is low or unstable.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.