
The AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08BG-W) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/4 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230E08BG-W is a 5/3-way double-solenoid valve with an exhaust center, built on the mid-size 4V200 body. It directs compressed air to double-acting cylinders and actuators; when both coils are off, the cylinder ports A and B vent to exhaust, so the actuator floats freely and can be moved by hand or by an external force. The -W suffix marks the external-pilot version: pilot air enters through a dedicated port rather than being tapped from the main line, which keeps switching dependable on low-pressure mains and in vacuum circuits. Its 13.6 mm2 effective area (Cv 0.8, catalog figure for the 4V230C-08) places it in the 4V200 5/3 flow class, a good match for bores of roughly O32-50 mm.
This exact SKU combines a DC24V coil drawing 3.0 W with a conventional terminal-box electrical entry and G-thread (BSPP parallel) 1/4 ports. The exhaust-center arrangement switches at up to 3 cycles per second with an activating time of 0.05 s or less, and the complete valve weighs 360 g. An aluminium-alloy body, IP65 protection and a manual override round out a valve that requires no lubrication and mounts on a base for integrated manifold groups.
| Model | AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08BG-W) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The external -W pilot takes its switching air from a separate port, so the valve keeps actuating even where an internally piloted 30E valve would stall on a weak or vacuum supply line.
In the center position both cylinder ports exhaust, letting operators nudge a jig or slide freely during changeover; energising either DC24V coil then locks in a firm drive direction.
Feeds double-acting cylinders around O32-50 mm on pushers, ejectors and clamping stations, with Cv 0.8 (catalog figure for the 4V230C-08) flow, sub-0.05 s response and 24 V control wiring via the terminal box.
Choose this valve when your cylinder needs a floating center state: the 30E exhaust center unloads both cylinder ports at rest, ideal for hand-adjustable slides or positions where trapped air must escape. If instead you need the cylinder to lock in place at center, step to the closed-center 4V230C; if both sides should stay pressurized, the 4V230P fits. For a small bore or slow duty, the 4V100 (Cv 0.6) costs less; for larger bores or faster cycling, move up to the 4V300 (Cv 1.65). A single valve suits isolated stations, while a manifold base consolidates several valves into one supply block.
Ordering a replacement? Match all five points: body size (4V200), function code (30E here), port and thread (1/4, G / BSPP), coil voltage (DC24V, 3.0 W), electrical entry (terminal box), and the -W external-pilot option. A standard 4V230E-08BG will not behave correctly on a low-pressure or vacuum main, so keep the -W suffix in your reorder.
Quick checklist
It controls double-acting cylinders and actuators, best suited to bores of roughly O32-50 mm with its 13.6 mm2 effective area (Cv 0.8, catalog figure for the 4V230C-08) and 3 cycles-per-second maximum. At rest, the exhaust center vents both cylinder ports, so the actuator floats rather than holding position. Because there is no mechanical lock, any suspended-load duty still needs a pilot-operated check valve or a mechanical brake at the cylinder.
The -W option converts the valve to external pilot supply: pilot air is piped to a dedicated port instead of being bled from the main inlet. Pick this version when your main line runs at low pressure or under vacuum, where an internally piloted spool cannot guarantee reliable shifting. Everything else, including the DC24V 3.0 W coil, terminal box, G-thread 1/4 ports and 360 g weight, stays identical to the base 30E model.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.