
The AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08C-AM) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/4 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230E08C-AM is a 5/3-way double-solenoid directional valve from the 4V200 series, built in the 1/4-inch (08) body with PT tapered threads. Its exhaust center is the defining trait: at rest, with neither coil energised, the two cylinder ports A and B are vented to atmosphere while supply is blocked, so a double-acting cylinder is free to be moved by hand or by load. Each solenoid pulse shifts the spool and drives the cylinder extend or retract; since it is a double-solenoid valve with no return spring, the spool stays where it was last pulsed. Rated at 13.6 mm2 effective area (Cv 0.8, catalog figure for the 4V230C-08) with a maximum cycling rate of 3 cycles per second, it is a natural match for double-acting cylinders around O32-50 mm bore.
This exact SKU combines an AC110V coil in the standard terminal-box entry with the factory -AM option: an AMISCO (Italian) solenoid coil fitted in place of the standard AirTAC coil. Body, function, ports and flow are unchanged. The complete 5/3 valve weighs 360 g, responds in 0.05 s or less, and carries IP65 (DIN40050) protection with a class B insulation system. Note that our datasheet does not list the electrical rating of the AMISCO coil variant, so confirm its exact VA figure with us before ordering.
| Model | AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08C-AM) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The exhaust center vents both cylinder ports when idle, so an operator can slide a double-acting clamp or positioning cylinder to a new spot without relieving the air supply.
Double solenoid control gives pulsed extend/retract commands for pusher arms on O32-50 mm cylinders, with Cv 0.8 (catalog figure for the 4V230C-08) flow well matched to mid-size packaging duties at up to 3 cycles per second.
AC110V control circuits are common in older plant and machine retrofits; the terminal-box entry keeps wiring straightforward, and the valve mounts alone or in a manifold group on a common base.
Choose this exhaust-center 5/3 when you want a cylinder that floats free at mid position - useful for manual jogging, safe staging of parts, or actuators that must not fight external motion when de-energised. If you need the cylinder rigidly held instead, the closed-center 4V230C is the right variant; the pressure-center 4V230P suits balanced three-position duties. Remember all 5/3 versions flow less than the 5/2 models: Cv 0.8 (catalog figure for the 4V230C-08) versus Cv 1.0. For bores above O50 mm or cycles that need more speed, step up to the 4V300 series (Cv 1.65); for a small O20-class cylinder the 4V100 (Cv 0.6) is more economical. Single valves mount directly, or several can share a manifold base for a compact station.
Replacing an existing unit? Match all five points: body size (4V200), function (5/3 exhaust center, code 30E), port and thread (PT1/4 on this model), coil voltage (AC110V here), and electrical entry (terminal box). The -AM suffix then tells you the AMISCO coil is fitted - keep it in the replacement code to preserve that option.
Quick checklist
It is a 5/3-way valve for double-acting cylinders and actuators - it pressurises one side while exhausting the other. With an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and a 3 cycle/second maximum frequency, it suits double-acting cylinders of roughly O32-50 mm bore. Because the exhaust center vents both cylinder ports at mid position, the cylinder floats free when de-energised.
This SKU runs on an AC110V coil with a terminal-box electrical entry and PT1/4 ports. The -AM suffix means an AMISCO (Italian) solenoid coil is factory-fitted instead of the standard AirTAC coil; the valve's body, function and flow are identical. Our published data does not include the AMISCO coil's VA rating, so please confirm the exact electrical figure with us when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.