
The AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008C-AM) is a genuine 5/2-way single solenoid (spring return) solenoid valve with PT1/4 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V21008C-AM is a 5/2-way single-solenoid valve from the 4V200 mid-body class, used to direct compressed air to and from double-acting cylinders and actuators. Energise the AC110V coil and the spool switches over; cut the signal and an internal spring snaps it back to the rest position, so the valve must stay energised to hold the advance stroke. Its effective area of 17.0 mm2 (Cv 1.0) gives enough flow for cylinders in the ~O32-50 mm bore range, with an activating time of 0.05 s or less.
This SKU carries the -AM factory option: an Italian AMISCO solenoid coil is fitted in place of the standard AirTAC coil on the AC110V terminal-box version. The body, 1/4in PT ports, function and flow class are identical to the base 4V210-08C, and at 220 g it mounts easily on a bracket or a manifold base. Running on clean, 40 um-filtered air at 0.15-0.8 MPa, it needs no lubrication. If your panel schedule specifies an exact coil VA, confirm the AMISCO coil rating with us before ordering.
| Model | AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008C-AM) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 220 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Feeds and exhausts a double-acting cylinder in the ~O32-50 mm class, with Cv 1.0 flow and cycling up to 5 cycles per second for repeat machine strokes.
Because the spring returns the valve whenever the AC110V signal drops, pushed products always get kicked back to the home position between cycles.
A constant signal keeps the clamp engaged; removing power releases it in a known direction, which simplifies fixture logic on assembly stations.
Pick this 4V200 body when the smaller 4V100 (Cv 0.6) starves your cylinder but the larger 4V300 (Cv 1.65) is more flow than the cycle needs - it is the natural match for ~O32-50 mm bores at moderate speed. Function-wise, choose this single solenoid when a dropped signal must always send the cylinder home; choose the 20 double solenoid if you need a memory function, or a 30C/30E/30P version when a defined centre condition matters. One valve suits a standalone station; order a manifold base to gang several together.
For an exact replacement, match five points: body size 4V200, function 10 (single, spring return), port and thread 1/4in PT, coil voltage AC110V, and electrical entry terminal. Also note the -AM suffix - this unit ships with the AMISCO coil, so re-order the same suffix to keep spares interchangeable.
Quick checklist
It is a 5/2-way valve with an effective area of 17.0 mm2 (Cv 1.0), sized for double-acting cylinders and actuators of roughly O32-50 mm bore. It is not suitable for single-acting cylinders, which need a 3/2-way valve, and it switches at up to 5 cycles per second.
It means the valve is fitted with an Italian AMISCO solenoid coil instead of the standard AirTAC coil. The ordered AC110V voltage, terminal entry, body and flow performance are unchanged. Our listing does not state the AMISCO coil's VA rating, so please confirm it with us if your control panel requires the exact figure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.