
The AirTAC 4V320-08AI Solenoid Valve, 5/2-way, PT1/4, AC220V, grommet entry (4V32008AI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/4 ports and an effective area of 28.0 mm² (Cv 1.65). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V320-08AI is a 5/2-way double-solenoid pneumatic directional valve built on the 4V300 body, pre-wired with a 0.5 m flying lead and a DIN-style grommet for AC220V power. It directs compressed air to both sides of a double-acting cylinder or rotary actuator, and because it is a memory-type valve, the spool stays in its last pulsed position when both coils are de-energised—no spring return, no holding current.
With an effective area of 28.0 mm² (Cv 1.65, catalog figure for the 4V310-10) and a maximum cycling rate of 4 cycles per second, this 400 g aluminum-alloy valve suits ~Ø50–80 mm cylinders in general industrial automation. The AC220V coil draws 4.5 VA, response time is 0.05 s or below, and IP65 ingress protection makes it reliable in washdown and dusty environments.
| Model | AirTAC 4V320-08AI Solenoid Valve, 5/2-way, PT1/4, AC220V, grommet entry (4V32008AI) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/4 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 28.0 mm² (Cv 1.65) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 4 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 400 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 28.0 mm² |
|---|---|
| Flow coefficient | Cv 1.65 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
A memory valve holds a diverter gate in the last commanded position even if the PLC output drops, preventing product misrouting during a power blink.
The double-solenoid hold keeps a clamp closed on a part without continuous coil power, reducing heat build-up in the AC220V coil during long machining cycles.
Drives the pneumatic side of an intensifier pump; the memory function ensures the pump doesn't retract unintentionally when the cycle-complete signal ends.
Choose the 4V320-08AI when your application needs a 5/2 valve that retains its last state even if the electrical signal is interrupted—common on clamps, gates, or diverter stations where a spring return would cause an unwanted shift. The 1/4-inch PT ports and AC220V grommet entry simplify wiring on machines with single-phase mains power.
If your cylinder bore is below ~Ø40 mm, stepping down to a 4V200 series (Cv 1.0) often gives a crisper response and a smaller manifold footprint. For bores above ~Ø80 mm, the 4V400 body (Cv 2.82) provides the higher flow needed to maintain speed. When replacing an existing valve, match all five points: body size (4V300), function (double 5/2), port and thread (1/4-inch PT), coil voltage (AC220V), and electrical entry (grommet with flying lead).
AirtacDistr lists every 4V320-08 order code with its price on one page at https://airtacdistr.com/products/airtac-4v320-08-solenoid-valve
Quick checklist
With a Cv of 1.65 and 28.0 mm² effective area, it provides good speed on double-acting cylinders in the ~Ø50–80 mm range at 0.5–0.7 MPa. For precise sizing, calculate the cylinder's swept volume against the valve's sonic conductance; the 4 c/s max frequency also sets a practical cycle-rate ceiling.
No. The 4V320 is a double-solenoid memory valve. The spool is held in place by land friction and balanced pressure after a pulse; no continuous current flows through the AC220V coil once the valve has shifted. This is not magnetic latching—it is a purely mechanical hold.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.