
The AirTAC 4V330P-10B Solenoid Valve, 5/3-way, pressure center, PT3/8, DC24V, terminal entry (4V330P10B) is a genuine 5/3-way 5/3 double solenoid — pressure center solenoid valve with PT3/8 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V330P-10B is a 5/3-way double-solenoid pneumatic directional valve that directs compressed air to double-acting cylinders and actuators. Its pressure-center spool configuration supplies pressure to both cylinder ports simultaneously when both solenoids are de-energized, allowing a cylinder to be pre-loaded or balanced against an external force in mid-stroke. This DC24V terminal-box model draws just 3.0 W and delivers a response time of 0.05 s or less, making it a precise choice for applications that need a powered neutral hold.
Built on the 4V300 aluminum-alloy body with 3/8-inch PT ports and 1/4-inch exhausts, this valve provides an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10) and a maximum cycling rate of 3 cycles per second. It weighs 450 g and operates on filtered, unlubricated air from 0.15 to 0.8 MPa, suiting ~O50-80 mm bore cylinders in press, clamping, and tensioning systems where a force-balanced center position is required.
| Model | AirTAC 4V330P-10B Solenoid Valve, 5/3-way, pressure center, PT3/8, DC24V, terminal entry (4V330P10B) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Pressure center |
| Port size | PT3/8 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -10 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
Maintains balanced pressure on both sides of a cylinder for precise tension control in film, paper, or textile converting lines, preventing slack without mechanical brakes.
Applies equal force to both cylinder ports at center, allowing a pneumatic press or clamp to hold a pre-loaded position against a workpiece without drifting.
Directs larger O50-80 mm double-acting cylinders on CNC fixtures and tool changers, where a powered neutral position ensures the actuator stays rigid under external cutting forces.
Choose the 4V330P-10B when your double-acting cylinder circuit needs a defined pressure state at mid-stroke, not a blocked or floating center. This 5/3 pressure-center valve is ideal for opposing-force applications like material tensioning or press-counterbalance, where both cylinder sides must stay charged. For a simpler spring-return 5/2, step to the 4V310; for a closed-center hold, use the 4V330C. If your cylinder bore is below O40 mm, the smaller 4V200 series (Cv 1.0) may be a better flow match, while bores above O80 mm often benefit from the 4V400 (Cv 2.82).
For a direct replacement, match five points exactly: 4V300 body size, 5/3 pressure-center function, 3/8-inch port thread (PT), DC24V coil voltage, and terminal-box electrical entry. The valve can be mounted individually or on a shared manifold base, and always pair it with a 40-micron filter for reliable spool operation.
AirtacDistr lists every 4V330P-10 order code with its price on one page at https://airtacdistr.com/products/airtac-4v330p-10-solenoid-valve
Quick checklist
When both solenoids are off, the spool shifts to a position that connects the inlet pressure to both cylinder ports (A and B) while blocking the exhausts. This pressurizes both sides of a double-acting cylinder, creating a balanced force that can pre-load a mechanism or resist an external push without the cylinder moving to an end stop.
Yes, the 4V300 body's 5/3 flow path provides an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10), which is well-matched to double-acting cylinders in the O50-80 mm range. At the rated 3 cycles per second maximum frequency and a 0.05 s response time, it will cycle a O63 mm cylinder efficiently for most industrial tasks. Ensure your supply pressure stays within the 0.15-0.8 MPa operating range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.