This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X15SH, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP80X15SH is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X15SH (ISO 21287 ACE), in the same bore, stroke and force class.
A double acting AirTAC compact cylinder in the 80 mm bore class, the ACP80X15SH delivers 2513.3 N push and 2356.2 N pull at 0.5 MPa (3518.6 N / 3298.7 N at 0.7 MPa) over a short 15 mm stroke. Its hard-anodized aluminium body with an S45C hard-chrome rod runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s, with a fixed TPU bumper at each end. The short ISO 21287-style body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and guarding where a full-length bore would never fit.
The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the body for end-of-stroke signalling. Note this model is discontinued: the current-production direct is ACE80X15, same bore, stroke and force class, so confirm the ISO 21287 mounting dimensions before swapping.
| Model | Airtac ACP Compact Cylinder ACP80X15SH |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X15SH |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X15SH (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X15SH produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
The 2513.3 N push at 0.5 MPa clinches or stakes aluminium brackets in a compact jig where the 15 mm stroke keeps the tooling closed and fast.
The short body hides inside the guard wall, pushing a locking pin 15 mm into a mating hole, with a CMSE sensor proving the gate is secured before cycle start.
For a 15 mm stroke at 80 mm bore you sit between the 63 mm bore (1558.6 N push at 0.5 MPa) and the 100 mm bore (3927.0 N push at 0.5 MPa); pick down if force is comfortable, up if you want margin. The piston drifts when air is removed, so add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mountings plus the fitted -S magnet for CMSE / DMSE switches round out the spec. Since ACP80X15SH is discontinued, order ACE80X15 and verify the ISO 21287 mounting footprint first.
Replacement checklist
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa that rises to 3518.6 N push and 3298.7 N pull. The theoretical maximum is 512.6 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
No - the ACP family is discontinued. The current-production replacement is ACE80X15, the ISO 21287 successor with the same 80 mm bore, 15 mm stroke and force class. Because the ACP was built to a DIN-standard compact format, confirm the ISO 21287 mounting dimensions before swapping. This unit carries the optional -S magnet for CMSE / DMSE switches, a 1/4" PT port, a female M12x1.75 rod thread and a fixed TPU bumper at both ends.
Send us the quantity and destination. We confirm price, availability and lead time on the ACE80X15SH replacement — usually within 7 hours.