
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X100BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X100BT is a double-acting JIS compact cylinder featuring a single 50mm bore piston and a 100mm stroke. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to round-body alternatives, saving valuable machine footprint. Delivering 981.8 N of push force at 0.5 MPa, it is tailored for substantial actuation tasks within confined spaces.
This variant includes a male-thread piston rod end (M18x1.5) to couple directly to your mechanism. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. While the body retains magnetic-switch grooves, this specific configuration ships without the internal magnet, operating smoothly across a 30-500 mm/s speed range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X100BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanisms on packaging lines at 981.8 N push force, utilizing the full 100mm stroke to erect heavy cardboard carton flaps rapidly.
Actuates heavy redirect gates on roller conveyors, where the male M18x1.5 rod threads securely into the diverter linkage to handle high lateral throughput.
Pushes finished plastic parts out of injection molding tools, relying on the compact 50mm bore body to fit within tight mold extraction cell clearances.
Stepping down, the 40mm bore yields 628.3 N push at 0.5 MPa, whereas stepping up to the 63mm bore provides 1558.6 N push at 0.5 MPa, letting you scale force precisely. Remember that a plain ACQ body will not hold a load if air pressure drops or the valve centers; the rod drifts and the fixed NBR bumper only decelerates near stroke end. For fail-safe positioning, specify an external rod lock or pilot-operated check valve. When ordering this unit, confirm the 50mm bore, 100mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the absence of a sensor magnet.
Quick checklist
At 0.5 MPa, this 50mm bore double-acting cylinder generates 981.8 N of push (extend) force and 824.6 N of pull (retract) force. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa operating pressure.
It features a male M18x1.5 threaded piston rod end for direct load coupling. Instead of an adjustable air cushion, it uses a fixed NBR elastomer bumper at each end to absorb impact; for high energy cycles, add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.