
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X100SBFAT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X100SBFAT is a double-acting JIS compact cylinder engineered for rigorous pneumatic duty. It provides 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, utilizing a 20 mm piston rod. The integrated C-clip and riveted piston-to-rod architecture drastically reduces axial footprint compared to conventional round-body units, saving valuable machine mounting depth.
This specific configuration includes a built-in piston magnet for position sensing via AirTAC reed or electronic switches housed in the body grooves. A male M18x1.5 thread on the rod end allows direct load coupling, while the FA mounting bracket provides a rigid front-face attachment interface. Deceleration relies on a fixed NBR elastomer bumper at each end stop, which is not user-adjustable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X100SBFAT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a 100 mm travel diverter arm on high-speed logistics conveyor belts, using the male M18x1.5 thread to securely attach the routing flap.
Opens and closes heavy machine tool safety enclosures where the short JIS compact body saves axial depth without sacrificing the 981.8 N push required to move the shield.
Folds top major carton flaps on a continuous packaging line, utilizing the integrated magnet to trigger electronic switches for the fold cycle.
When sizing this 50 mm bore unit, stepping down to the 40 mm bore yields 628.3 N of push force at 0.5 MPa, whereas stepping up to the 63 mm bore provides 1558.6 N. This 100 mm stroke represents the maximum standard stroke length for this bore family, making it a prime choice for long-travel compact tasks. To finalize your order, confirm the 50 mm bore, 100 mm stroke, NPT1/4 port, male M18x1.5 rod thread, FA bracket, and the S magnet option.
Keep in mind that a standard ACQ body does not hold its position or load if air pressure drops or the directional valve is centered; the rod will drift. The fixed NBR bumper only decelerates the piston near the stroke extremes and does not function as a mechanical lock. For fail-safe load holding, incorporate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
This 50 mm bore cylinder generates 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, with speeds of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb the end stop impact. It is not a field-adjustable air cushion, so for high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.