
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X100SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X100SBT is a double-acting JIS compact cylinder engineered for space-constrained setups. Its short C-clip and riveted body architecture drastically reduce axial mounting depth compared to round-body alternatives. Delivering 981.8 N of push force at 0.5 MPa, it incorporates a 20 mm piston rod and a NPT1/4 port.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male M18x1.5 thread (-B) for direct load coupling. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at each end to absorb end-stop impact. The hard-anodized inner bore ensures long service life across the 30-500 mm/s speed range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X100SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Securing heavy cast iron automotive brake calipers during machining, utilizing the 981.8 N extend force to lock the part against the fixture stops.
Actuating a routing gate on a 50 mm thick packaging conveyor line, where the 100 mm stroke shifts wooden pallets onto a secondary spur track.
Driving a mechanical plow blade to fold corrugated cardboard flaps on a high-speed case erector, taking advantage of the compact body depth.
When sizing your actuator, consider stepping down to the Ø40 bore (628.3 N push at 0.5 MPa) for lighter duties, or moving up to the Ø63 bore (1558.6 N push at 0.5 MPa) for heavier loads. To order this 50 mm bore, 100 mm stroke unit correctly, confirm the NPT1/4 port, the male M18x1.5 rod thread, and the required magnetic switch. Note that a plain ACQ body will not maintain its position if air pressure drops or the directional valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
This 50 mm bore cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The port size is NPT1/4.
It features a male M18x1.5 threaded rod end for direct mounting. It does not use an adjustable air cushion; instead, fixed NBR elastomer bumpers absorb end-stop shock. For high kinetic energy loads, slow the approach speed or use an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.