
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X100ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 100mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X100ST is a double-acting JIS compact cylinder featuring a 50 mm bore and 100 mm stroke. It generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. The riveted C-clip body design drastically reduces overall axial length compared to traditional round-body cylinders, saving valuable mounting depth in tight machine layouts.
Equipped with a built-in piston magnet (-S), this model supports AirTAC magnetic reed or electronic solid-state switches housed in the grooves around the body. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy loads. The Ø20 mm piston rod utilizes a standard female M10x1.5 thread. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X100ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a routing flap on a high-speed logistics conveyor to sort parcels into secondary chutes.
Opens and closes the safety sliding door of a CNC turning center, maximizing floor space.
Deploys cardboard sheets into pallet gaps at the end of an automated packing line.
This 50 mm bore unit provides 981.8 N push at 0.5 MPa. If you need less force, stepping down to the 40 mm bore yields 628.3 N push, while stepping up to the 63 mm bore provides 1558.6 N push. Keep in mind that a standard ACQ body will drift and cannot hold a load if air pressure is lost or the valve is centered; achieving a fail-safe hold requires adding an external rod lock or a pilot-operated check valve.
When ordering, confirm the essentials: 50 mm bore, 100 mm stroke, NPT1/4 port, the -S magnet for sensing, and the default female M10x1.5 rod-end thread.
Quick checklist
At 0.5 MPa it provides 981.8 N push and 824.6 N pull. At 0.7 MPa the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb the stop. It is not a field-adjustable air cushion or a locking brake. For high-speed or high-energy loads, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.