
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X10BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 10mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X10BT is a double-acting JIS compact cylinder engineered for space-constrained machinery, utilizing a short C-clip and riveted body design to minimize axial footprint. It delivers a robust 981.8 N push and 824.6 N pull force at 0.5 MPa, operating efficiently within a 30-500 mm/s speed range.
This specific configuration includes a male M18x1.5 piston rod end for direct mechanical coupling to your load. The 50 mm bore uses a NPT1/4 port and relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy; note this is not an adjustable air cushion, so high-speed applications may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X10BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a short 10 mm ejection stroke inside tight mold platen areas, utilizing the 981.8 N push force to knock out formed plastic parts reliably.
Actuates small clamping or positioning stops on heavy metal forming equipment where the male M18x1.5 rod secures custom tooling fixtures.
Drives compact sealing mechanisms on continuous motion packaging lines, benefiting from the space-saving axial depth of the JIS body.
When sizing this 50 mm bore model, stepping down to a 40 mm bore reduces the 0.5 MPa push force to 628.3 N, while stepping up to a 63 mm bore increases it to 1558.6 N. Verify your load requirements against these figures to ensure optimal performance.
Remember that a standard ACQ body does not hold its position if air pressure is lost or the valve is centered, as the piston will drift and the bumper only decelerates near the stroke end; fail-safe holding requires an external rod lock or pilot-operated check valve. To order, confirm the 10 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the absence of a sensor magnet.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force reaches 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. The maximum standard stroke available for this 50 mm bore is 100 mm.
No, it uses a fixed NBR elastomer bumper at each end to absorb end stops, which is not a field-adjustable air cushion. Additionally, while the body features sensor grooves, this specific model ships without a sensor magnet, so reed or electronic switches will not function without modification.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.