
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X10SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 10mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X10SBT is a double-acting JIS compact cylinder engineered for a 50 mm bore and a 10 mm stroke. It generates 981.8 N of push force and 824.6 N of pull force at 0.5 MPa, making it highly effective for short, powerful linear movements. The C-clip and riveted body design drastically reduces axial footprint compared to standard round-body alternatives, saving valuable machine depth.
This specific configuration includes an S option for a built-in piston magnet, allowing seamless integration with AirTAC reed or electronic switches via the body's peripheral slots. The B option provides a male M18x1.5 threaded rod end coupled with a 20 mm rod diameter for direct mounting. Stopping is handled by a fixed NBR elastomer bumper at each end, which absorbs end-stop energy without requiring field adjustment. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X10SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a compact 981.8 N push to eject plastic parts from tight mold cavities, utilizing the short 10 mm stroke and male M18x1.5 rod for direct stripper plate contact.
Delivers rapid, high-force folding action on packaging lines where axial space is restricted, relying on the fixed NBR bumper to absorb the impact of repeated high-speed cycles.
Secures light stamping dies in position using 824.6 N of retract force, while the built-in magnet enables electronic switches to verify clamp engagement before the press cycles.
When sizing this 50 mm bore actuator, consider stepping down to a 40 mm bore (providing 628.3 N push at 0.5 MPa) for lighter duties, or moving up to a 63 mm bore (delivering 1558.6 N push at 0.5 MPa) if your application demands greater thrust. Keep in mind that a plain compact cylinder like this drifts when air pressure is lost or the valve is centered, as the fixed bumper only decelerates the piston near stroke end rather than locking it; utilize an external rod lock or pilot-operated check valve if fail-safe load holding is required.
To order, confirm this exact configuration: 50 mm bore, 10 mm stroke, NPT1/4 port thread, S magnet option for position sensing, and B male M18x1.5 rod end. Operating speed ranges from 30-500 mm/s within a 0.15-1.0 MPa pressure envelope.
Quick checklist
This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a pressure range of 0.15-1.0 MPa.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion; for high-energy cycles, you should add an external shock absorber or slow the approach. The S option provides a built-in magnet for AirTAC reed or electronic switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.