
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X15BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 15mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X15BT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduce axial mounting depth compared to standard round-body units, making it highly effective for machines where space is tight. The unit features a 20 mm piston rod and a NPT1/4 port.
This specific configuration includes a male-thread piston rod end (M18x1.5) for direct load coupling, and relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. While the body retains grooves for magnetic switches, this particular model ships without the internal magnet, so position sensing is not possible without modification. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X15BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 981.8 N of extend force at 0.5 MPa to secure heavy cast iron blocks onto machining centers, utilizing the short 15 mm stroke for rapid actuation.
Drives a sealing head with its male M18x1.5 rod end to fold and press corrugated packaging flaps, benefiting from the compact body to fit within tight conveyor frames.
Ejects formed plastic parts from injection molds using the 824.6 N retract force, where the fixed NBR bumper quietly absorbs the rapid end-stop impact.
When sizing your pneumatic drive, consider stepping down to the ACQ40 bore, which yields 628.3 N of push force at 0.5 MPa, or stepping up to the ACQ63 bore, which provides 1558.6 N at 0.5 MPa. The ACQ50X15BT is ideal for applications requiring moderate force within a very short 15 mm stroke, well under the 100 mm maximum standard stroke limit for this 50 mm bore.
Keep in mind that a standard ACQ body does not hold its position if air pressure is lost or the valve is centered; the rod will drift, and the fixed NBR bumper only decelerates the piston near the stroke end. For a fail-safe hold, you must integrate an external rod lock or a pilot-operated check valve. To order, confirm the 50 mm bore, 15 mm stroke, NPT1/4 port, male M18x1.5 rod thread, and the absence of a sensor magnet.
Quick checklist
The ACQ50X15BT generates 981.8 N push and 824.6 N pull at 0.5 MPa, and 1374.4 N push at 0.7 MPa. The maximum push force is 200 kgf at 1.0 MPa. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
No, this model uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which is not an adjustable air cushion. Additionally, while the body features sensor grooves, this specific SKU ships without the internal magnet, so it cannot support reed or electronic switches as built.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.