
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X15SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 15mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X15SBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduce axial mounting depth compared to standard round-body cylinders, saving valuable machine footprint space.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches, and a male M18x1.5 thread (-B) on the 20 mm piston rod for direct load coupling. Deceleration at stroke ends is handled by fixed NBR elastomer bumpers rather than adjustable cushions, meaning external shock absorbers should be added for high-energy loads. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X15SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 981.8 N of extend force at 0.5 MPa to securely clamp heavy cast iron engine blocks during multi-axis CNC machining operations.
Utilizes the short 15 mm stroke and male M18x1.5 rod end to drive a sealing jaw assembly, folding corrugated cardboard flaps at high cycle rates.
Employs the integrated magnet with an electronic switch to confirm ejection position, pushing finished plastic parts out of the mold cavity.
When sizing this 50 mm bore model, consider stepping down to a 40 mm bore (628.3 N push at 0.5 MPa) for lighter duties, or moving up to a 63 mm bore (1558.6 N push at 0.5 MPa) if your application demands greater thrust. Remember that a plain compact cylinder like this does not hold its position or load if air pressure drops or the valve is centered; the rod will drift, and the fixed NBR bumper only decelerates it near the end of travel. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
To order this exact unit correctly, confirm the 50 mm bore, 15 mm stroke, NPT1/4 port, the -S magnet requirement for sensors, and the -B male M18x1.5 rod thread.
Quick checklist
This 50 mm bore double-acting cylinder provides a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force is 1374.4 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, with speeds ranging from 30-500 mm/s.
No, the ACQ50X15SBT uses fixed NBR elastomer bumpers at each end to absorb end-stop impact; it does not feature an adjustable air cushion. For high-speed or high-energy loads, you should add an external shock absorber or throttle the approach speed via flow controls.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.