
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X15ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 15mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X15ST is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force at 0.5 MPa and 1374.4 N at 0.7 MPa. Its short C-clip and riveted body design drastically reduces overall axial length compared to round-body alternatives, saving valuable mounting depth in tight machinery footprints.
This 50 mm bore variant incorporates a fixed NBR elastomer bumper at each end to absorb end-stop impact, meaning it is not a field-adjustable air cushion. Equipped with a built-in piston magnet (the S option), it supports AirTAC reed or electronic solid-state switches via the sensor grooves machined around the body. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X15ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides compact 981.8 N push force at 0.5 MPa to eject plastic parts from injection molds where axial depth is strictly limited by mold plates.
Drives a 15 mm stroke sealing head on a packaging line, using the fixed NBR bumper to absorb the rapid end-stop impact during high-speed box folding.
Actuates a short-stroke routing gate on a conveyor system, utilizing the built-in magnet to confirm gate position via solid-state sensors.
When sizing this 50 mm bore, stepping down to a 40 mm bore yields 628.3 N push at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N push at 0.5 MPa, allowing you to scale force precisely. The ACQ50X15ST uses a NPT1/4 port and a female M10x1.5 rod-end thread on a 20 mm rod.
Note that a standard ACQ body does not hold its position if air pressure is lost or the valve is centered; the piston will drift, and the fixed bumper only decelerates near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. The maximum standard stroke available for this 50 mm bore is 100 mm.
Quick checklist
This double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s.
No, the ACQ50X15ST uses a fixed NBR elastomer bumper at each end to decelerate the piston, not an adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.