
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X20BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X20BT is a double-acting JIS compact cylinder engineered for tight axial spaces. Utilizing a riveted piston-to-rod connection and C-clip assembly, the short body footprint drastically reduces mounting depth compared to standard round-body units. It provides 981.8 N of push force and 824.6 N of pull force at 0.5 MPa.
This specific configuration includes a male M18x1.5 thread on the Ø20 mm piston rod for direct mechanical coupling. The cylinder relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable cushion, and while the body features magnetic-switch grooves, this variant ships without a sensing magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X20BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the mechanical jaws on a continuous-motion carton erector to open and fold cardboard blanks at high cycle rates.
Actuates a diverting pop-up arm on a roller conveyor to push heavy pallets onto a secondary packaging line lane.
Provides the linear knock-out stroke to eject molded plastic components from a vertical injection molding machine tool.
When sizing this actuator, consider stepping down to the Ø40 bore for 628.3 N push at 0.5 MPa, or moving up to the Ø63 bore for 1558.6 N push if your application requires significantly more extension force. To finalize an order for this unit, confirm the 50 mm bore, 20 mm stroke, NPT1/4 port, and the male M18x1.5 rod thread. Note that a plain ACQ cylinder will drift and fail to hold its position if air pressure is lost or the valve is centered; a fail-safe load hold requires adding an external rod lock or a pilot-operated check valve.
Quick checklist
The ACQ50X20BT delivers 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not a field-adjustable air cushion; for high-energy cycles, add an external shock absorber. It does not function as a brake and will drift if air is lost, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.