
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X20SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X20SBT is a double-acting JIS compact cylinder engineered to deliver a robust 981.8 N of push force at 0.5 MPa and 1374.4 N at 0.7 MPa. Its short C-clip and riveted body architecture drastically reduces axial mounting depth compared to standard round-body cylinders, making it highly advantageous for machinery where space is strictly constrained. The 20 mm stroke operates within the 100 mm standard limit for this 50 mm bore, ensuring optimal performance for short-travel tasks.
This specific configuration includes a built-in piston magnet (-S) for compatibility with AirTAC reed or electronic switches via the body's sensor grooves, and a male-thread piston rod end (-B) sized at M18x1.5 for direct, secure load coupling. Instead of an adjustable air cushion, the cylinder relies on a fixed NBR elastomer bumper at each end to decelerate the piston near the stroke limits. For high-energy cycles, adding external shock absorption is recommended to protect the assembly. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X20SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push force needed to rapidly fold and seal heavy cardboard flaps on continuous packaging lines, utilizing its 20 mm short stroke for high-speed cycling.
The male M18x1.5 rod thread couples directly to a bar puller mechanism, while the compact body minimizes Z-axis interference behind the lathe spindle.
Drives a routing gate on a conveyor network, using the integrated magnet to trigger electronic sensors that confirm gate position before product transfer.
When sizing this 50 mm bore model, stepping down to a 40 mm bore yields 628.3 N of push force at 0.5 MPa, whereas stepping up to a 63 mm bore provides 1558.6 N. The ACQ50X20SBT strikes a balance for medium-duty actuation. To finalize your order, confirm the 50 mm bore, 20 mm stroke, NPT1/4 port, the -S magnet requirement, and the M18x1.5 male rod thread. Note that a plain compact cylinder drifts when air pressure is lost or a valve is centered; if your process demands fail-safe position holding, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 50 mm bore double-acting cylinder provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb the end-stop impact. Because it is not field-adjustable, you should slow the approach speed or add an external shock absorber for high-energy loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.