
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X20ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X20ST is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force at 0.5 MPa (1374.4 N at 0.7 MPa) within a highly space-efficient envelope. Its short C-clip and riveted body architecture drastically reduces axial mounting depth compared to traditional round-body units, making it optimal for tight machine footprints. The 50 mm bore integrates a 20 mm piston rod and a NPT1/4 port.
This unit includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches fitted into the body grooves. End-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, ensuring consistent stopping without manual tuning. The standard female rod-end thread is M10x1.5, and the cylinder operates smoothly at speeds between 30 and 500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X20ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Routes heavy pallets between packaging lines using 981.8 N of push force at 0.5 MPa, fitting neatly into tight conveyor frame gaps.
Secures aluminum castings for machining centers, leveraging the 20 mm stroke and built-in magnet for precise end-of-travel confirmation.
Presses small bearings into housings on an assembly line, relying on the fixed NBR bumper to absorb the 1374.4 N impact at 0.7 MPa.
When sizing your actuator, stepping down to a 40 mm bore yields 628.3 N of push force at 0.5 MPa, while stepping up to a 63 mm bore provides 1558.6 N. The ACQ50X20ST offers a balanced middle ground for mid-weight handling. To finalize your order, confirm the 50 mm bore, 20 mm stroke, NPT1/4 port, the required female M10x1.5 rod thread, and the -S magnet option.
Be aware that a standard compact cylinder cannot sustain a load if air pressure drops or the directional valve centers; the piston will drift and the NBR bumper only decelerates the impact near the stroke end. If your fixture must hold position without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
This 50 mm bore double-acting cylinder generates 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
No, the ACQ50X20ST uses a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. Additionally, it does not feature a locking mechanism; if air is lost, the rod drifts. You must add an external shock absorber for high-energy stops and a separate rod lock for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.