
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X20T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 20mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X20T is a double-acting, single-rod JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly significantly reduce overall axial length compared to round-body alternatives, saving valuable machine footprint depth.
This 50 mm bore unit features a 20 mm piston rod, a NPT1/4 port, and a default female M10x1.5 rod-end thread. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable air cushions, meaning external shock absorbers should be added for high-energy loads. The body includes magnetic-switch grooves, though this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X20T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides compact ejection force for plastic injection molds where axial depth is restricted, utilizing the 981.8 N push to safely strip finished parts.
Drives the sealing head on continuous motion cartoning equipment, using the short 20 mm stroke to rapidly fold and seal corrugated flaps.
Actuates routing flippers on conveyor lines to redirect heavy pallets, relying on the fixed NBR bumper to absorb the stop impact at cycle end.
When sizing this 981.8 N (0.5 MPa) unit, stepping down to a 40 mm bore yields 628.3 N of push, while stepping up to a 63 mm bore provides 1558.6 N. To finalize your order, confirm the 50 mm bore, 20 mm stroke, NPT1/4 port, female M10x1.5 rod thread, and that no sensor magnet is required. Note that a plain ACQ cylinder will drift and cannot hold a load if air pressure drops or the valve is centered; for fail-safe positioning, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The ACQ50X20T generates 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No. This model uses fixed NBR elastomer bumpers at the stroke ends, not an adjustable air cushion, so high-speed applications may need external shock absorption. Additionally, while the body has sensor grooves, this specific unit ships without the internal magnet, so it cannot directly host a reed or electronic switch.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.