
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X25BFBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 25mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X25BFBT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to standard round-body units, saving valuable machine footprint in tight assembly zones. The bore is hard-anodized for extended wear life.
This specific configuration includes a male-thread piston rod end (M18x1.5) for direct mechanical coupling, alongside an FB front-foot mounting bracket for secure installation. Deceleration at stroke ends is handled by fixed NBR elastomer bumpers rather than adjustable air cushions, meaning external shock absorbers should be specified for high-energy cycles. The body features integrated magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X25BFBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the sealing head on a continuous carton sealing press, using its 981.8 N thrust to securely fold and bond corrugated flaps.
Pushes heavy timber pallets onto a secondary conveyor line, utilizing the FB bracket to anchor the cylinder firmly against high lateral shifting forces.
Provides a short 25 mm ejection stroke to clear plastic parts from an injection mold, relying on the male M18x1.5 thread for a rigid ejector rod coupling.
When sizing this 50 mm bore actuator, consider stepping down to the 40 mm bore (628.3 N push @0.5 MPa) for lighter loads, or up to the 63 mm bore (1558.6 N push @0.5 MPa) if your application requires greater thrust. Keep in mind that a standard ACQ body will not hold a load if air pressure drops or the valve is centered; the rod will drift and the fixed bumper only decelerates it near the end of travel. For fail-safe position holding, an external rod lock or pilot-operated check valve is required.
To order, confirm the essentials: 50 mm bore, 25 mm stroke, NPT1/4 port, female rod thread default overridden by the male M18x1.5 (-B), no magnet, and the FB mounting bracket.
Quick checklist
At 0.5 MPa, the push force is 981.8 N and the pull force is 824.6 N. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the stop, which is not an adjustable air cushion. For high-speed cycles, add an external shock absorber. Additionally, it does not hold its load if air is lost; the piston drifts, so an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.