
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X25BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 25mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X25BT is a double-acting, single-rod JIS compact cylinder engineered to deliver a robust 981.8 N push force at 0.5 MPa. Utilizing a riveted piston-to-rod connection and C-clip assembly, the short body design drastically reduces axial mounting depth compared to traditional round-body alternatives. This specific configuration includes a male M18x1.5 piston rod thread, allowing direct, secure coupling to your tooling.
This 50 mm bore unit relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. The hard-anodized aluminum bore ensures smooth, low-friction operation across a 30-500 mm/s speed range. While the body features integrated magnetic-switch grooves, this particular SKU ships without a piston magnet, so position sensing is not supported out of the box. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X25BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 981.8 N of extend force to secure heavy cast iron engine blocks during CNC milling operations, utilizing the male M18x1.5 thread for rigid fixture attachment.
Drives a short 25 mm stroke to rapidly fold corrugated cardboard flaps on high-speed packaging lines, where the short C-clip body minimizes machine footprint.
Actuates a routing gate to redirect heavy pallets on a warehouse conveyor, relying on the 1374.4 N push force at 0.7 MPa to overcome lateral inertia.
Selecting this 50 mm bore with a 25 mm stroke provides a middle-ground solution, offering significantly more thrust than the 40 mm bore (628.3 N push at 0.5 MPa) while being more compact than the 63 mm bore (1558.6 N push at 0.5 MPa). When ordering, verify your requirements for the NPT1/4 port, the male M18x1.5 rod end, and the absence of a sensor magnet. If your sequence demands position feedback, you would need the -S variant instead.
Keep in mind that a standard double-acting cylinder of this type does not inherently hold its load if air pressure drops or the directional valve is centered. The piston will drift under load, and the NBR bumper only decelerates the stroke near its endpoints rather than locking the rod. For fail-safe vertical load holding, consider integrating an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This 50 mm bore cylinder generates a push force of 981.8 N and a pull force of 824.6 N at 0.5 MPa. At 0.7 MPa, the push force increases to 1374.4 N. The maximum push force is 200 kgf at the maximum operating pressure of 1.0 MPa. It operates effectively within a speed range of 30-500 mm/s and a temperature range of -20 to +70 C.
No, this model uses fixed NBR elastomer bumpers at both stroke ends rather than an adjustable air cushion. For high-speed or high-energy loads, you should add an external shock absorber or slow the approach speed. Additionally, while the body has sensor grooves, this specific SKU does not include the internal magnet required for reed or electronic switch operation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.