
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X25LBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 25mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X25LBT is a double-acting JIS compact air cylinder with a 50mm bore and 25mm stroke. It yields 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. The short C-clip and riveted piston-to-rod assembly drastically reduce overall length, saving axial mounting depth where a conventional round-body unit will not fit. This specific configuration ships with an LB mounting bracket for rigid lateral attachment.
Deceleration relies on a fixed NBR elastomer bumper at each end, not an adjustable air cushion, so operators should slow the approach or add an external shock absorber for high-energy cycles. The Ø20 mm piston rod uses a standard female M10x1.5 thread for load coupling. Although this model lacks a built-in magnet, the body retains peripheral grooves for adding position sensing if upgraded later. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X25LBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push at 0.5 MPa needed to positively fold heavy corrugated cardboard flaps on continuous case-sealing lines.
Uses the LB bracket to rigidly mount a 25mm stroke diverter arm, reliably redirecting heavy pallets between conveyor routes.
Fits into shallow mold bases to eject plastic parts, saving axial machine footprint while delivering up to 200 kgf at 1.0 MPa.
When sizing this 50mm bore, compare its 981.8 N push force at 0.5 MPa against the smaller Ø40 bore (628.3 N push) for lighter duties, or step up to the Ø63 bore (1558.6 N push) if your application requires greater thrust. Remember that a plain ACQ cylinder does not hold its position or load when air is lost or the valve is centred; the piston drifts and the fixed NBR bumper only decelerates near stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 50mm bore, 25mm stroke, NPT1/4 port, and the LB mounting bracket. This variant uses the default female M10x1.5 rod-end thread and ships without a sensor magnet.
Quick checklist
This 50mm bore double-acting cylinder delivers 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa pressure, 30-500 mm/s speed, and -20 to +70 C temperatures.
It uses a fixed NBR elastomer bumper at each end to absorb the stop, which is not an adjustable air cushion. For high-speed or high-energy cycles, add an external shock absorber. Additionally, it does not hold load on air loss; the rod drifts, so an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.