
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X30BCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X30BCBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted piston-to-rod assembly to minimize overall axial length. This thin body design significantly saves mounting depth in tight machinery footprints compared to conventional round-body units. Delivering 981.8 N of push force at 0.5 MPa, it is built around a 50 mm bore and a 30 mm stroke.
This specific configuration includes a male M18x1.5 threaded piston rod end for direct load coupling, a NPT1/4 port, and a CB mounting bracket interface. The bore is hard-anodized for longevity, and the cylinder relies on a fixed NBR elastomer bumper at each end for end-stop deceleration rather than an adjustable air cushion. The body retains magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X30BCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Halts heavy wooden pallets on a packaging line using the 981.8 N push force and CB bracket mount to absorb repeated forward impacts.
Secures cast aluminum engine blocks during machining via the male M18x1.5 rod thread, providing rigid holding without excessive axial depth.
Ejects stamped sheet metal parts from a mechanical press, utilizing the 30 mm stroke and fixed NBR bumper to manage rapid cycling.
When sizing this 50 mm bore actuator, evaluate your force margins: the next bore down (Ø40) yields 628.3 N push, while the next size up (Ø63) provides 1558.6 N at 0.5 MPa. This 981.8 N output suits medium-duty positioning tasks. Ensure your ordering essentials match the code: 50 mm bore, 30 mm stroke, NPT1/4 port, male M18x1.5 rod thread, CB mount, and no magnet.
Keep in mind that a standard ACQ body does not hold its position or load if air pressure drops or the directional valve centers. The rod will drift, and the fixed NBR bumper only absorbs shock near the stroke limits rather than locking the piston. For fail-safe vertical or suspended load holding, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The ACQ50X30BCBT provides 981.8 N push and 824.6 N pull at 0.5 MPa, 1374.4 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not a field-adjustable air cushion; for high energy cycles, slow the approach or add an external shock absorber. Additionally, while the body has sensor grooves, this specific SKU lacks the internal magnet, so it cannot trigger AirTAC reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.