
The AirTAC ACQ Ultra Thin Air Cylinder ACQ50X30BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø50mm bore and 30mm stroke, PT1/4 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ50X30BT is a double-acting JIS compact cylinder engineered to deliver 981.8 N of push force and 824.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to standard round-body cylinders, making it highly effective for machinery where space along the stroke axis is tight. The bore features a hard-anodized inner wall and a two-way seal for durable, low-friction operation.
This specific configuration includes a male-thread piston rod end (M18x1.5) for direct, secure coupling to your tooling. Instead of an adjustable air cushion, the cylinder relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. While the body retains integrated magnetic-switch grooves, this unit ships without a piston magnet, so position sensing is not enabled out of the box. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ50X30BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 981.8 N push force needed to positively eject plastic parts from injection molding dies, utilizing the male M18x1.5 thread for secure mold coupling.
Actuates heavy-duty routing gates on high-speed beverage conveyors, where the fixed NBR bumper reliably absorbs the 30mm stroke impact without adjustment.
Drives the sealing head down onto corrugated cartons, taking advantage of the compact body depth to fit within tight packaging machine frames.
When sizing your actuator, stepping down to the ACQ40 bore yields 628.3 N of push force at 0.5 MPa, whereas stepping up to the ACQ63 provides 1558.6 N. The 50mm bore here offers a substantial middle ground, peaking at 200 kgf of maximum push at 1.0 MPa. Remember that a plain ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 50mm bore, 30mm stroke, NPT1/4 port, male M18x1.5 rod thread (B option), and no sensor magnet. Ensure your operating speed stays within the 30-500 mm/s range and avoid side loading the 20mm rod to prevent premature seal wear.
Quick checklist
At 0.5 MPa, this 50mm bore cylinder provides 981.8 N of push force and 824.6 N of pull force. At 0.7 MPa, the push force is 1374.4 N. The maximum push force is 200 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ50X30BT uses a fixed NBR elastomer bumper at each end to decelerate the piston. It is not a field-adjustable air cushion. For high-speed or high-energy loads, you should either slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.